-
-
Notifications
You must be signed in to change notification settings - Fork 42
Restore OS Image File
By default, Root access is not allowed on Speeder Pad. To enable it, follow these instructions to restore OS image file:
Note: A microSD card of at least 32 GB is required.
-
Download this restoration image and unzip it: Speeder Pad Restoration Image V1.2
⚠ Latest V1.4 image no longer allows SSH access, please use V1.2
-
Download and install Raspberry Pi Imager here: https://www.raspberrypi.com/software/
-
Launch Raspberry Pi Imager:
-
Select
Speeder_Pad_V1.2_Restoration-230303.xz
image file asOperating System
by selectingUse custom
. -
Select your microSD card as
Storage
. -
Then click
Write
. -
Once the image is written, turn off Speeder Pad if is on and remove all devices plugged into the USB ports.
-
Insert microSD card in Speeder Pad and turn on it.
-
A loading bar should appear:
-
And wait until the bar is fully charged and green, this may take several minutes (10/15 minutes):
-
When it's done, turn off Speeder Pad and remove the microSD card.
-
Turn Speeder Pad back on, it should start normally and arrive on KlipperScreen splashscreen.
-
Wait until KlipperScreen show a connection error message on the Speeder Pad and go to
Menu
-->Network
and connect it to your WiFi network. -
Once connected, restart the Speeder Pad for the connection to take effect.
-
You can now connect to SSH with this login:
user: pi password: flsun
• About
• Wiki Changelog
• KlipperScreen Changelog
• STL Files & Themes
• Restore OS Image File
• SSH Connection
• Change pi User Password
• Change Timezone
• Change Wi-Fi Location
• Update Dependencies
• Delete Flsun Builds
• Install Official Builds (1 instance)
• Install Official Builds (Multiple instances)
• V400 (MKS Nano V2.0 - STM32F103)
• V400 (Nano V2.1 Clone - GD32F303)
• V400 (BigTreeTech SKR 3.0)
• V400 (MKS Nano V3.0/V3.1)
• Super Racer (MKS Nano V3.0/V3.1)
• Super Racer (BigTreeTech SKR 1.3)
• Super Racer (BigTreeTech SKR 2.0)
• Fix Shutdown button in Mainsail
• Add Webcams Support
• Add Timelapse Support
• Add Exclude Objects Support
• Use Klipper TMC Autotune
• Use Neopixels Ring Light
• Use BigTreeTech KNOMI
• Calibrate your Printer
• Measure resonances with Raspberry Pi Pico
• Measure resonances with Fysetc Portable Input Shaper
• Start and End Gcode
• Enable Firmware Retraction
• Display Thumbnails in Mainsail and KlipperScreen
• Enable Root Access
• Change SSH Welcome Message and Cleanup Files
• Set a Static IP Address
• Change Boot Logo