Todo list(for me)

take off height is 1m, mayb add param to change this(/plan_manage/script/trajectory_msg_converter_~.py)

Fast-Planner for px4

The orignal fast planner is https://github.com/HKUST-Aerial-Robotics/Fast-Planner
in may case the main algorithm and concept is same but edited for px4 sitl and real flight

px4
My drone use px4 with D435i, T265
I added and edited some parts to run in px4 and check it in px4_sitl gazebo

CONCEPT

This is simple
(1) user - Set the destination
(2) kino or topo planner gonna make the trajectory
(3) pub the trajectory to mavros as /mavros/setpoint_raw/local
(4) then px4 gonna fly

In my case, I used https://github.com/mzahana/px4_fast_planner and this one use 'movros_controllers', which was unstable in my drone

Prerequisite

You should catkin build nlopt first in your catkin workspace.

• git clone https://github.com/ethz-asl/nlopt.git
• catkin build nlopt
• source devel/setup.bash

INSTALL & SETTINGS

• cd ~/drone_ws/src # in my case 'drone_ws' and 'PX4-Autopilot' is located in HOME
• git clone https://github.com/Kihoon-Shin/Fast-Planner.git
• cd .. && catkin build && source devel/setup.bash
• cd src/Fast-Planner
• cp storage/1024_gazebo-classic_iris_depth_camera ~/PX4-Autopilot/ROMFS/px4fmu_common/init.d-posix/airframes/
• cp storage/depth_camera.sdf ~/PX4-Autopilot/Tools/simulation/gazebo-classic/sitl_gazebo-classic/models/depth_camera/
• cd ~/.ros/etc/init.d-posix/airframes
• cp ~/drone_ws/src/Fast-Planner/storage/1024_gazebo-classic_iris_depth_camera .
• cd ~/drone_ws/src/Fast-Planner/fast_planner/plan_manage/script
• sudo chmod 777 trajectory_msg_converter_raw.py
• gedit ~/PX4-Autopilot/src/modules/simulation/simulator_mavlink/sitl_targets_gazebo-classic.cmake

• # about in line 103~130, add 'iris_depth_camera'

• cd ~/PX4-Autopilot && DONT_RUN=1 make px4_sitl_default gazebo-classic_iris_depth_camera
• gedit ~/drone_ws/src/Fast-Planner/uav_simulator/Utils/testbot_description/launch/testbot.launch

	<!--<node name="joint_state_publisher" pkg="joint_state_publisher" type="joint_state_publisher"/>-->
	<node name="robot_state_publisher" pkg="robot_state_publisher" type="robot_state_publisher" />

RUN in gazebo

• cd ~/PX4-Autopilot
• source Tools/setup_gazebo.bash $(pwd) $(pwd)/build/px4_sitl_default
• export ROS_PACKAGE_PATH=$ROS_PACKAGE_PATH:$(pwd)
• export ROS_PACKAGE_PATH=$ROS_PACKAGE_PATH:$(pwd)/Tools/sitl_gazebo
• roslaunch plan_manage px4_sitl_kino_replan.launch

in another terminal

• rosrun mavros mavsafety arm

• rosrun mavros mavsys mode -c OFFBOARD

• To command the drone to fly to a target pose, publish a single message to the /move_base_simple/goal topic as follows

rostopic pub --once /move_base_simple/goal geometry_msgs/PoseStamped "header:
  seq: 0
  stamp:
    secs: 0
    nsecs: 0
  frame_id: ''
pose:
  position:
    x: 19.0
    y: 15.0
    z: 3.0
  orientation:
    x: 0.0
    y: 0.0
    z: 0.0
    w: 1.0"

RUN in real drone

• cd ~/PX4-Autopilot

• source Tools/setup_gazebo.bash $(pwd) $(pwd)/build/px4_sitl_default

• export ROS_PACKAGE_PATH=$ROS_PACKAGE_PATH:$(pwd)

• export ROS_PACKAGE_PATH=$ROS_PACKAGE_PATH:$(pwd)/Tools/sitl_gazebo

• roslaunch plan_manage px4_kino_replan.launch

• arming and set the OFFBOARD mode

ignition gazebo(working)

• cd ~/Firmware && make px4_sitl ignition

• roslaunch mavros px4.launch fcu_url:=udp://:14540@localhost:14557

• rosrun ros_ign_bridge parameter_bridge /depth_camera@sensor_msgs/[email protected] /rgb_camera@sensor_msgs/[email protected] /depth_camera/points@sensor_msgs/[email protected]

• rostopic echo /mavrolocal_position/pose

• rostopic echo --noar/depth_camera

• rosrun topic_tools transform /depth_camera /d435/depth/ima_rect_raw sensor_msgs/Image 'sensor_msgs.msg.Image(header=std_msgs.msg.Header(seq=m.header.seq,stamp=m.header.stamp,frame_id="camera_link"),height=m.height,width=m.width,encoding=m.encoding,is_bigendian=m.is_bigendian,step=m.step,data=m.data)' --import sensor_msgs std_msgs

ERRORS

There were two main error when I tested and runned these

(1) Fast-planner is not working error

when clicking and dragging for 2d nav goal then the error go up https://blog.csdn.net/asd22222984565/article/details/126779002#comments_23784587

(2) mavros setpoint not working error in sitl

if drone arms but not takes off then, I'm not sure but my solution was change the topic from /mavros/setpoint_raw/local to /mavros/setpoint_position/local
if you changes it, then the topic doesn't care about acc and vel, only position

the way to change the setpoint topic is edit the /Fast-Planner/fast_planner/plan_manage/launch/px4_sitl_kino_replan.launch from to