testing engage chp results and structure

Engage-Testing/chp_test/chp_topping_depth_1.0_prod_1.0_inj_1.0_temp_400.txt

@@ -0,0 +1,77 @@
+----------------------------------------------------------------------------------------
+GEOPHIRES v2.0 Input File
+----------------------------------------------------------------------------------------
+***Subsurface technical parameters***
+*************************************
+Reservoir Model,3,						---m/A Single Fracture Thermal Drawdown
+Drawdown Parameter,.00002,					---[kg/s/m2]
+Reservoir Depth,1.0,						---[km]
+Number of Segments,1,						---[-]
+Gradient 1,70,							---[deg.C/km]
+Maximum Temperature,400,					---[deg.C]
+Number of Production Wells,1.0,					---[-]
+Number of Injection Wells,1.0,					---[-]
+Production Well Diameter,8.5,					---[inch]
+Injection Well Diameter,8.5,					---[inch]
+Ramey Production Wellbore Model,0,				---Should be 0 (disabled) or 1 (enabled)
+Production Wellbore Temperature Drop,5,				---[deg.C]
+Injection Wellbore Temperature Gain,3,				---[deg.C]
+Production Flow Rate per Well,70,				---[kg/s]
+Reservoir Volume Option,1,					---Should be 1,2,3 or 4. See manual for details.
+Fracture Shape,1,						---Should be 1,2,3 or 4
+Fracture Area,200000,						---[m2]
+Number of Fractures,12,						---[-]
+Fracture Separation,80,						---[m]
+Injectivity Index,5,						---[kg/s/bar]
+Injection Temperature,70,					---[deg.C]
+Maximum Drawdown,1,						---[-] no redrilling considered
+Reservoir Heat Capacity,1000,					---[J/kg/K]
+Reservoir Density,3000,						---[kg/m3]
+Reservoir Thermal Conductivity,3,				---[W/m/K]
+Water Loss Fraction,0.02,						---[-]
+
+***Surface Technical Parameters***
+**********************************
+
+End-Use Option,31,						--- CHP Topping Cycle with electricity as the main product
+Power Plant Type,4,						--- Double-Flash
+Circulation Pump Efficiency,.80,				---[-]
+Utilization Factor,.9,						---[-]
+End-Use Efficiency Factor,.9,					---[-]
+Surface Temperature,15,						---[deg.C]
+Ambient Temperature,15,		 				---[deg.C]
+
+***Financial Parameters***
+**************************
+
+Plant Lifetime,35,						---[years]
+Economic Model,2,						---BICYCLE Levelized Cost Model
+Fraction of Investment in Bonds,.5,				---[-] Required for BICYCLE model
+Inflated Bond Interest Rate,.05,				---[-] Required for BICYCLE model
+Inflated Equity Interest Rate,.08,				---[-] Required for BICYCLE model
+Inflation Rate,.02,						---[-] Required for BICYCLE model
+Combined Income Tax Rate,.3,					---[-] Required for BICYCLE model
+Gross Revenue Tax Rate,0,					---[-] Required for BICYCLE model
+Investment Tax Credit Rate,0,					---[-] Required for BICYCLE model
+Property Tax Rate,0,						---[-] Required for BICYCLE model
+Inflation Rate During Construction,0.05,				---[-]
+
+***Capital and O&M Cost Parameters***
+*************************************
+
+Well Drilling and Completion Capital Cost Adjustment Factor,1, 	---[-] use built in correlations
+Well Drilling Cost Correlation,3,				---[-] use built in correlations
+Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] use built in correlations
+Surface Plant Capital Cost Adjustment Factor,1,			---[-] use built in correlations
+Field Gathering System Capital Cost Adjustment Factor,1,	---[-] use built in correlations
+Exploration Capital Cost Adjustment Factor,1,			---[-] use built in correlations
+Wellfield O&M Cost Adjustment Factor,1,				---[-] use built in correlations
+Surface Plant O&M Cost Adjustment Factor,1,			---[-] use built in correlations
+Water Cost Adjustment Factor,1,					---[-] use built in correlations
+Heat Rate,.02,							---[$/kWh]
+
+***Simulation Parameters***
+***************************
+
+Print Output to Console,1,					---Should be 1 (to print) or 0 (to not print)
+Time steps per year,10,						---[-]

Engage-Testing/chp_test/chp_topping_depth_1.0_prod_1.0_inj_2.0_temp_400.txt

@@ -0,0 +1,77 @@
+----------------------------------------------------------------------------------------
+GEOPHIRES v2.0 Input File
+----------------------------------------------------------------------------------------
+***Subsurface technical parameters***
+*************************************
+Reservoir Model,3,						---m/A Single Fracture Thermal Drawdown
+Drawdown Parameter,.00002,					---[kg/s/m2]
+Reservoir Depth,1.0,						---[km]
+Number of Segments,1,						---[-]
+Gradient 1,70,							---[deg.C/km]
+Maximum Temperature,400,					---[deg.C]
+Number of Production Wells,1.0,					---[-]
+Number of Injection Wells,2.0,					---[-]
+Production Well Diameter,8.5,					---[inch]
+Injection Well Diameter,8.5,					---[inch]
+Ramey Production Wellbore Model,0,				---Should be 0 (disabled) or 1 (enabled)
+Production Wellbore Temperature Drop,5,				---[deg.C]
+Injection Wellbore Temperature Gain,3,				---[deg.C]
+Production Flow Rate per Well,70,				---[kg/s]
+Reservoir Volume Option,1,					---Should be 1,2,3 or 4. See manual for details.
+Fracture Shape,1,						---Should be 1,2,3 or 4
+Fracture Area,200000,						---[m2]
+Number of Fractures,12,						---[-]
+Fracture Separation,80,						---[m]
+Injectivity Index,5,						---[kg/s/bar]
+Injection Temperature,70,					---[deg.C]
+Maximum Drawdown,1,						---[-] no redrilling considered
+Reservoir Heat Capacity,1000,					---[J/kg/K]
+Reservoir Density,3000,						---[kg/m3]
+Reservoir Thermal Conductivity,3,				---[W/m/K]
+Water Loss Fraction,0.02,						---[-]
+
+***Surface Technical Parameters***
+**********************************
+
+End-Use Option,31,						--- CHP Topping Cycle with electricity as the main product
+Power Plant Type,4,						--- Double-Flash
+Circulation Pump Efficiency,.80,				---[-]
+Utilization Factor,.9,						---[-]
+End-Use Efficiency Factor,.9,					---[-]
+Surface Temperature,15,						---[deg.C]
+Ambient Temperature,15,		 				---[deg.C]
+
+***Financial Parameters***
+**************************
+
+Plant Lifetime,35,						---[years]
+Economic Model,2,						---BICYCLE Levelized Cost Model
+Fraction of Investment in Bonds,.5,				---[-] Required for BICYCLE model
+Inflated Bond Interest Rate,.05,				---[-] Required for BICYCLE model
+Inflated Equity Interest Rate,.08,				---[-] Required for BICYCLE model
+Inflation Rate,.02,						---[-] Required for BICYCLE model
+Combined Income Tax Rate,.3,					---[-] Required for BICYCLE model
+Gross Revenue Tax Rate,0,					---[-] Required for BICYCLE model
+Investment Tax Credit Rate,0,					---[-] Required for BICYCLE model
+Property Tax Rate,0,						---[-] Required for BICYCLE model
+Inflation Rate During Construction,0.05,				---[-]
+
+***Capital and O&M Cost Parameters***
+*************************************
+
+Well Drilling and Completion Capital Cost Adjustment Factor,1, 	---[-] use built in correlations
+Well Drilling Cost Correlation,3,				---[-] use built in correlations
+Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] use built in correlations
+Surface Plant Capital Cost Adjustment Factor,1,			---[-] use built in correlations
+Field Gathering System Capital Cost Adjustment Factor,1,	---[-] use built in correlations
+Exploration Capital Cost Adjustment Factor,1,			---[-] use built in correlations
+Wellfield O&M Cost Adjustment Factor,1,				---[-] use built in correlations
+Surface Plant O&M Cost Adjustment Factor,1,			---[-] use built in correlations
+Water Cost Adjustment Factor,1,					---[-] use built in correlations
+Heat Rate,.02,							---[$/kWh]
+
+***Simulation Parameters***
+***************************
+
+Print Output to Console,1,					---Should be 1 (to print) or 0 (to not print)
+Time steps per year,10,						---[-]

Engage-Testing/chp_test/chp_topping_depth_1.0_prod_1.0_inj_3.0_temp_400.txt

@@ -0,0 +1,77 @@
+----------------------------------------------------------------------------------------
+GEOPHIRES v2.0 Input File
+----------------------------------------------------------------------------------------
+***Subsurface technical parameters***
+*************************************
+Reservoir Model,3,						---m/A Single Fracture Thermal Drawdown
+Drawdown Parameter,.00002,					---[kg/s/m2]
+Reservoir Depth,1.0,						---[km]
+Number of Segments,1,						---[-]
+Gradient 1,70,							---[deg.C/km]
+Maximum Temperature,400,					---[deg.C]
+Number of Production Wells,1.0,					---[-]
+Number of Injection Wells,3.0,					---[-]
+Production Well Diameter,8.5,					---[inch]
+Injection Well Diameter,8.5,					---[inch]
+Ramey Production Wellbore Model,0,				---Should be 0 (disabled) or 1 (enabled)
+Production Wellbore Temperature Drop,5,				---[deg.C]
+Injection Wellbore Temperature Gain,3,				---[deg.C]
+Production Flow Rate per Well,70,				---[kg/s]
+Reservoir Volume Option,1,					---Should be 1,2,3 or 4. See manual for details.
+Fracture Shape,1,						---Should be 1,2,3 or 4
+Fracture Area,200000,						---[m2]
+Number of Fractures,12,						---[-]
+Fracture Separation,80,						---[m]
+Injectivity Index,5,						---[kg/s/bar]
+Injection Temperature,70,					---[deg.C]
+Maximum Drawdown,1,						---[-] no redrilling considered
+Reservoir Heat Capacity,1000,					---[J/kg/K]
+Reservoir Density,3000,						---[kg/m3]
+Reservoir Thermal Conductivity,3,				---[W/m/K]
+Water Loss Fraction,0.02,						---[-]
+
+***Surface Technical Parameters***
+**********************************
+
+End-Use Option,31,						--- CHP Topping Cycle with electricity as the main product
+Power Plant Type,4,						--- Double-Flash
+Circulation Pump Efficiency,.80,				---[-]
+Utilization Factor,.9,						---[-]
+End-Use Efficiency Factor,.9,					---[-]
+Surface Temperature,15,						---[deg.C]
+Ambient Temperature,15,		 				---[deg.C]
+
+***Financial Parameters***
+**************************
+
+Plant Lifetime,35,						---[years]
+Economic Model,2,						---BICYCLE Levelized Cost Model
+Fraction of Investment in Bonds,.5,				---[-] Required for BICYCLE model
+Inflated Bond Interest Rate,.05,				---[-] Required for BICYCLE model
+Inflated Equity Interest Rate,.08,				---[-] Required for BICYCLE model
+Inflation Rate,.02,						---[-] Required for BICYCLE model
+Combined Income Tax Rate,.3,					---[-] Required for BICYCLE model
+Gross Revenue Tax Rate,0,					---[-] Required for BICYCLE model
+Investment Tax Credit Rate,0,					---[-] Required for BICYCLE model
+Property Tax Rate,0,						---[-] Required for BICYCLE model
+Inflation Rate During Construction,0.05,				---[-]
+
+***Capital and O&M Cost Parameters***
+*************************************
+
+Well Drilling and Completion Capital Cost Adjustment Factor,1, 	---[-] use built in correlations
+Well Drilling Cost Correlation,3,				---[-] use built in correlations
+Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] use built in correlations
+Surface Plant Capital Cost Adjustment Factor,1,			---[-] use built in correlations
+Field Gathering System Capital Cost Adjustment Factor,1,	---[-] use built in correlations
+Exploration Capital Cost Adjustment Factor,1,			---[-] use built in correlations
+Wellfield O&M Cost Adjustment Factor,1,				---[-] use built in correlations
+Surface Plant O&M Cost Adjustment Factor,1,			---[-] use built in correlations
+Water Cost Adjustment Factor,1,					---[-] use built in correlations
+Heat Rate,.02,							---[$/kWh]
+
+***Simulation Parameters***
+***************************
+
+Print Output to Console,1,					---Should be 1 (to print) or 0 (to not print)
+Time steps per year,10,						---[-]

Engage-Testing/chp_test/chp_topping_depth_1.0_prod_1.0_inj_4.0_temp_400.txt

@@ -0,0 +1,77 @@
+----------------------------------------------------------------------------------------
+GEOPHIRES v2.0 Input File
+----------------------------------------------------------------------------------------
+***Subsurface technical parameters***
+*************************************
+Reservoir Model,3,						---m/A Single Fracture Thermal Drawdown
+Drawdown Parameter,.00002,					---[kg/s/m2]
+Reservoir Depth,1.0,						---[km]
+Number of Segments,1,						---[-]
+Gradient 1,70,							---[deg.C/km]
+Maximum Temperature,400,					---[deg.C]
+Number of Production Wells,1.0,					---[-]
+Number of Injection Wells,4.0,					---[-]
+Production Well Diameter,8.5,					---[inch]
+Injection Well Diameter,8.5,					---[inch]
+Ramey Production Wellbore Model,0,				---Should be 0 (disabled) or 1 (enabled)
+Production Wellbore Temperature Drop,5,				---[deg.C]
+Injection Wellbore Temperature Gain,3,				---[deg.C]
+Production Flow Rate per Well,70,				---[kg/s]
+Reservoir Volume Option,1,					---Should be 1,2,3 or 4. See manual for details.
+Fracture Shape,1,						---Should be 1,2,3 or 4
+Fracture Area,200000,						---[m2]
+Number of Fractures,12,						---[-]
+Fracture Separation,80,						---[m]
+Injectivity Index,5,						---[kg/s/bar]
+Injection Temperature,70,					---[deg.C]
+Maximum Drawdown,1,						---[-] no redrilling considered
+Reservoir Heat Capacity,1000,					---[J/kg/K]
+Reservoir Density,3000,						---[kg/m3]
+Reservoir Thermal Conductivity,3,				---[W/m/K]
+Water Loss Fraction,0.02,						---[-]
+
+***Surface Technical Parameters***
+**********************************
+
+End-Use Option,31,						--- CHP Topping Cycle with electricity as the main product
+Power Plant Type,4,						--- Double-Flash
+Circulation Pump Efficiency,.80,				---[-]
+Utilization Factor,.9,						---[-]
+End-Use Efficiency Factor,.9,					---[-]
+Surface Temperature,15,						---[deg.C]
+Ambient Temperature,15,		 				---[deg.C]
+
+***Financial Parameters***
+**************************
+
+Plant Lifetime,35,						---[years]
+Economic Model,2,						---BICYCLE Levelized Cost Model
+Fraction of Investment in Bonds,.5,				---[-] Required for BICYCLE model
+Inflated Bond Interest Rate,.05,				---[-] Required for BICYCLE model
+Inflated Equity Interest Rate,.08,				---[-] Required for BICYCLE model
+Inflation Rate,.02,						---[-] Required for BICYCLE model
+Combined Income Tax Rate,.3,					---[-] Required for BICYCLE model
+Gross Revenue Tax Rate,0,					---[-] Required for BICYCLE model
+Investment Tax Credit Rate,0,					---[-] Required for BICYCLE model
+Property Tax Rate,0,						---[-] Required for BICYCLE model
+Inflation Rate During Construction,0.05,				---[-]
+
+***Capital and O&M Cost Parameters***
+*************************************
+
+Well Drilling and Completion Capital Cost Adjustment Factor,1, 	---[-] use built in correlations
+Well Drilling Cost Correlation,3,				---[-] use built in correlations
+Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] use built in correlations
+Surface Plant Capital Cost Adjustment Factor,1,			---[-] use built in correlations
+Field Gathering System Capital Cost Adjustment Factor,1,	---[-] use built in correlations
+Exploration Capital Cost Adjustment Factor,1,			---[-] use built in correlations
+Wellfield O&M Cost Adjustment Factor,1,				---[-] use built in correlations
+Surface Plant O&M Cost Adjustment Factor,1,			---[-] use built in correlations
+Water Cost Adjustment Factor,1,					---[-] use built in correlations
+Heat Rate,.02,							---[$/kWh]
+
+***Simulation Parameters***
+***************************
+
+Print Output to Console,1,					---Should be 1 (to print) or 0 (to not print)
+Time steps per year,10,						---[-]

Engage-Testing/requirements.txt

@@ -0,0 +1,6 @@
+numpy
+pandas
+matplotlib
+mpmath
+plotly
+scipy

Engage-Testing/results.csv

@@ -0,0 +1,5 @@
+,Depth (m),Number of Prod Wells,Number of Inj Wells,Maximum Reservoir Temperature (deg.C),Wellfield Cost ($M),Surface Plant Cost ($M),Exploration Cost ($M),Field Gathering System Cost ($M),Wellfield O&M Cost ($M/year),Surface Plant O&M Cost ($M/year),Make-Up Water O&M Cost ($M/year),Average Reservoir Heat Extraction (MWth),Average Total Electricity Generation (MWe),Lifetime
+3,1.0,1,1,400.0,4.6,6.51,2.98,1.19,0.12,0.29,0.04,0.56,0.56,35
+2,1.0,1,2,400.0,6.9,6.51,2.98,1.6,0.15,0.29,0.04,0.56,0.56,35
+0,1.0,1,3,400.0,9.2,6.51,2.98,2.05,0.18,0.29,0.04,0.56,0.56,35
+1,1.0,1,4,400.0,11.5,6.51,2.98,2.51,0.2,0.29,0.04,0.56,0.56,35