Nitrokey Pro PCB Design

Nitrokey Pro is a USB 32-bit computer with STM32F103 processor and an OpenPGP smart card. It has a minimalistic design, the MCU is running at 72MHz, and it has a SWD port for main flash ROM update.

This is Nitrokey PCB design for KiCAD, based on Niibe Yutaka's Flying Stone Tiny 01 (FST-01).

Files

README:           This file
BOM.csv           Part list including Digikey product number.
ChangeLog:        History of this project
cryptostick.pro:  Project file of KiCAD
cryptostick.sch:  Schematic
cryptostick.cmp:  Component
cryptostick.net:  Netlist
cryptostick.stf:  Component and Module
cryptostick.brd:  PCB design
library:          schematic library
module:           footprint modules for PCB
fabrication:      Gerber files of the PCB
datasheet:        Datasheets of parts

Note that files under datasheet directory is copyrighted by vendors.

Terms and conditions

This work is based on Niibe Yutaka's Flying Stone Tiny 01 (FST-01) PCB Design.

I would like to ask users to keep the design as "Open Hardware". See the page for the definition of "Open Hardware": http://www.opencollector.org/Whyfree/open_hardware.html

Nevertheless, schematic design is distributed under Creative Commons Attribution 3.0 Unported License (CC BY 3.0). See: http://creativecommons.org/licenses/by/3.0/

Schematic design can be used for any purpose and you don't need to open your modifications to my design.

For PCB, it is distributed under Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0). See: http://creativecommons.org/licenses/by-sa/3.0/

External modules

For module/SMT_CAP.mod and module/SMT_RES.mod, module drawings are copied from w_smd_cap.mod and w_smd_resistors.mod by W.Lain. Files are available at: http://smisioto.no-ip.org/elettronica/kicad/kicad-en.htm

Its copyright notice is like following:

Kicad Library by W. Lain - [email protected]

This library is released under the terms of the Creative Commons license v3.0, Attribution-Share Alike.

The author holds no responsibility for any damage that can be caused by the usage of this library. You are however welcome to report any error or discrepance to the author, provided that you give also the correct information and its source (i.e. the correct datasheet).

Note that the author used publicly available data sheets from many different companies, and that package dimensions, pin numeration and schematic symbols may vary slightly between companies.

Flashing

For instructions on flashing the device please have a look at the Nitrokey Pro firmware repo.