boards: ARK CAN node NuttX flash savings

PX4 · Oct 18, 2023 · 210a3b9 · 210a3b9
1 parent fefdad8
commit 210a3b9
Show file tree

Hide file tree

Showing 8 changed files with 4 additions and 133 deletions.
diff --git a/boards/ark/can-flow/nuttx-config/nsh/defconfig b/boards/ark/can-flow/nuttx-config/nsh/defconfig
@@ -27,7 +27,6 @@
 # CONFIG_NSH_DISABLE_LOOPS is not set
 # CONFIG_NSH_DISABLE_LS is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_PS is not set
@@ -66,17 +65,8 @@ CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEBUG_TCBINFO=y
 CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
 CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
 CONFIG_GRAN=y
 CONFIG_GRAN_INTR=y
@@ -88,14 +78,9 @@ CONFIG_INIT_STACKSIZE=2624
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MM_REGIONS=2
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_RAMTRON=y
 CONFIG_NAME_MAX=40
 CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_ARGCAT=y
@@ -108,31 +93,20 @@ CONFIG_NSH_NESTDEPTH=8
 CONFIG_NSH_QUOTE=y
 CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
 CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
 CONFIG_PTHREAD_MUTEX_ROBUST=y
 CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=5
-CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=5
-CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=254
 CONFIG_SCHED_HPWORKSTACKSIZE=3000
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -151,11 +125,6 @@ CONFIG_STM32_FLASH_PREFETCH=y
 CONFIG_STM32_FLOWCONTROL_BROKEN=y
 CONFIG_STM32_JTAG_SW_ENABLE=y
 CONFIG_STM32_PWR=y
-CONFIG_STM32_RTC=y
-CONFIG_STM32_RTC_HSECLOCK=y
-CONFIG_STM32_RTC_MAGIC=0xfacefeee
-CONFIG_STM32_RTC_MAGIC_REG=1
-CONFIG_STM32_RTC_MAGIC_TIME_SET=0xfacefeef
 CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32_SPI1=y

diff --git a/boards/ark/can-flow/src/init.c b/boards/ark/can-flow/src/init.c
@@ -156,8 +156,7 @@ __EXPORT int board_app_initialize(uintptr_t arg)
 	led_on(LED_BLUE);
 
 	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
+	//px4_platform_configure();
 
 	return OK;
 }
diff --git a/boards/ark/can-gps/nuttx-config/nsh/defconfig b/boards/ark/can-gps/nuttx-config/nsh/defconfig
@@ -27,7 +27,6 @@
 # CONFIG_NSH_DISABLE_LOOPS is not set
 # CONFIG_NSH_DISABLE_LS is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_PS is not set
@@ -66,17 +65,8 @@ CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEBUG_TCBINFO=y
 CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
 CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
 CONFIG_GRAN=y
 CONFIG_GRAN_INTR=y
@@ -90,14 +80,9 @@ CONFIG_INIT_STACKSIZE=2624
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MM_REGIONS=2
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_RAMTRON=y
 CONFIG_NAME_MAX=40
 CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_ARGCAT=y
@@ -110,37 +95,25 @@ CONFIG_NSH_NESTDEPTH=8
 CONFIG_NSH_QUOTE=y
 CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
 CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
 CONFIG_PTHREAD_MUTEX_ROBUST=y
 CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=5
-CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=5
-CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
 CONFIG_SIG_SIGUSR1_ACTION=y
 CONFIG_SIG_SIGUSR2_ACTION=y
-CONFIG_SIG_SIGWORK=4
 CONFIG_STACK_COLORATION=y
 CONFIG_START_DAY=30
 CONFIG_START_MONTH=11
@@ -155,11 +128,6 @@ CONFIG_STM32_I2C1=y
 CONFIG_STM32_I2C2=y
 CONFIG_STM32_JTAG_SW_ENABLE=y
 CONFIG_STM32_PWR=y
-CONFIG_STM32_RTC=y
-CONFIG_STM32_RTC_HSECLOCK=y
-CONFIG_STM32_RTC_MAGIC=0xfacefeee
-CONFIG_STM32_RTC_MAGIC_REG=1
-CONFIG_STM32_RTC_MAGIC_TIME_SET=0xfacefeef
 CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32_SPI1=y

diff --git a/boards/ark/can-gps/src/init.c b/boards/ark/can-gps/src/init.c
@@ -156,8 +156,7 @@ __EXPORT int board_app_initialize(uintptr_t arg)
 #endif // FLASH_BASED_PARAMS
 
 	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
+	//px4_platform_configure();
 
 	return OK;
 }
diff --git a/boards/ark/can-rtk-gps/nuttx-config/nsh/defconfig b/boards/ark/can-rtk-gps/nuttx-config/nsh/defconfig
@@ -27,7 +27,6 @@
 # CONFIG_NSH_DISABLE_LOOPS is not set
 # CONFIG_NSH_DISABLE_LS is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_PS is not set
@@ -66,17 +65,8 @@ CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEBUG_TCBINFO=y
 CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
 CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
 CONFIG_GRAN=y
 CONFIG_GRAN_INTR=y
@@ -90,14 +80,9 @@ CONFIG_INIT_STACKSIZE=2624
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MM_REGIONS=2
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_RAMTRON=y
 CONFIG_NAME_MAX=40
 CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_ARGCAT=y
@@ -110,31 +95,20 @@ CONFIG_NSH_NESTDEPTH=8
 CONFIG_NSH_QUOTE=y
 CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
 CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
 CONFIG_PTHREAD_MUTEX_ROBUST=y
 CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=5
-CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=5
-CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -155,11 +129,6 @@ CONFIG_STM32_I2C1=y
 CONFIG_STM32_I2C2=y
 CONFIG_STM32_JTAG_SW_ENABLE=y
 CONFIG_STM32_PWR=y
-CONFIG_STM32_RTC=y
-CONFIG_STM32_RTC_HSECLOCK=y
-CONFIG_STM32_RTC_MAGIC=0xfacefeee
-CONFIG_STM32_RTC_MAGIC_REG=1
-CONFIG_STM32_RTC_MAGIC_TIME_SET=0xfacefeef
 CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32_SPI1=y

diff --git a/boards/ark/can-rtk-gps/src/init.c b/boards/ark/can-rtk-gps/src/init.c
@@ -162,8 +162,7 @@ __EXPORT int board_app_initialize(uintptr_t arg)
 #endif // FLASH_BASED_PARAMS
 
 	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
+	//px4_platform_configure();
 
 	return OK;
 }
diff --git a/boards/ark/cannode/nuttx-config/nsh/defconfig b/boards/ark/cannode/nuttx-config/nsh/defconfig
@@ -27,7 +27,6 @@
 # CONFIG_NSH_DISABLE_LOOPS is not set
 # CONFIG_NSH_DISABLE_LS is not set
 # CONFIG_NSH_DISABLE_MKDIR is not set
-# CONFIG_NSH_DISABLE_MKFATFS is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
 # CONFIG_NSH_DISABLE_PS is not set
@@ -66,17 +65,8 @@ CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEBUG_TCBINFO=y
 CONFIG_DEFAULT_SMALL=y
-CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_PIPE_MAXSIZE=1024
-CONFIG_DEV_PIPE_SIZE=70
 CONFIG_FDCLONE_STDIO=y
-CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FATTIME=y
-CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
-CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
 CONFIG_GRAN=y
 CONFIG_GRAN_INTR=y
@@ -90,14 +80,9 @@ CONFIG_INIT_STACKSIZE=2624
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_MAX_EXITFUNS=1
-CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MM_REGIONS=2
-CONFIG_MTD=y
-CONFIG_MTD_BYTE_WRITE=y
-CONFIG_MTD_PARTITION=y
-CONFIG_MTD_RAMTRON=y
 CONFIG_NAME_MAX=40
 CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_ARGCAT=y
@@ -110,31 +95,20 @@ CONFIG_NSH_NESTDEPTH=8
 CONFIG_NSH_QUOTE=y
 CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
-CONFIG_NSH_STRERROR=y
 CONFIG_NSH_VARS=y
-CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
-CONFIG_PRIORITY_INHERITANCE=y
 CONFIG_PTHREAD_MUTEX_ROBUST=y
 CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=5
-CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=5
-CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
-CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=254
 CONFIG_SCHED_HPWORKSTACKSIZE=3000
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
-CONFIG_SCHED_LPWORK=y
-CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -155,11 +129,6 @@ CONFIG_STM32_FLOWCONTROL_BROKEN=y
 CONFIG_STM32_I2C1=y
 CONFIG_STM32_JTAG_SW_ENABLE=y
 CONFIG_STM32_PWR=y
-CONFIG_STM32_RTC=y
-CONFIG_STM32_RTC_HSECLOCK=y
-CONFIG_STM32_RTC_MAGIC=0xfacefeee
-CONFIG_STM32_RTC_MAGIC_REG=1
-CONFIG_STM32_RTC_MAGIC_TIME_SET=0xfacefeef
 CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32_SPI1=y

diff --git a/boards/ark/cannode/src/init.c b/boards/ark/cannode/src/init.c
@@ -180,8 +180,7 @@ __EXPORT int board_app_initialize(uintptr_t arg)
 #endif // FLASH_BASED_PARAMS
 
 	/* Configure the HW based on the manifest */
-
-	px4_platform_configure();
+	//px4_platform_configure();
 
 	return OK;
 }