Add missing configuration header

boards/frdmmcxn947/cmsis/examples/standalone/Blinky/MCUXpressoConfig/utilities/fsl_debug_console_conf.h

@@ -0,0 +1,180 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _FSL_DEBUG_CONSOLE_CONF_H_
+#define _FSL_DEBUG_CONSOLE_CONF_H_
+
+#include "fsl_common.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus */
+
+/****************Debug console configuration********************/
+
+/* Debug console configuration check */
+#if ((defined(SDK_DEBUGCONSOLE) && (SDK_DEBUGCONSOLE != 1)))
+    #error SDK_DEBUGCONSOLE has already been defined and the value is not 1 as value in the DebugConsole component instance setting.
+#endif
+
+#if (defined(SDK_DEBUGCONSOLE_UART))
+    #error SDK_DEBUGCONSOLE_UART should not be defined. Remove SDK_DEBUGCONSOLE_UART from the project setting or defines.
+#endif
+
+#if (defined(DEBUG_CONSOLE_TRANSFER_NON_BLOCKING))
+    #error DEBUG_CONSOLE_TRANSFER_NON_BLOCKING should not be defined. Remove DEBUG_CONSOLE_TRANSFER_NON_BLOCKING from the project setting or defines.
+#endif
+
+#if ((defined(SERIAL_PORT_TYPE_UART) && (SERIAL_PORT_TYPE_UART != 1)))
+    #error SERIAL_PORT_TYPE_UART define value is not 1 as value in the DebugConsole component instance setting.
+#elif (!defined(SERIAL_PORT_TYPE_UART))
+    #error SERIAL_PORT_TYPE_UART is not defined. Define SERIAL_PORT_TYPE_UART=1 at the project setting.
+#endif
+
+#if ((defined(SERIAL_PORT_TYPE_SWO) && (SERIAL_PORT_TYPE_SWO != 0)))
+    #error The SERIAL_PORT_TYPE_SWO define value is not 0 as value in the DebugConsole component instance setting.
+#endif
+
+/*! @brief If Non-blocking mode is needed, please define it at project setting,
+ * otherwise blocking mode is the default transfer mode.
+ * Warning: If you want to use non-blocking transfer,please make sure the corresponding
+ * IO interrupt is enable, otherwise there is no output.
+ * And non-blocking is combine with buffer, no matter bare-metal or rtos.
+ * Below shows how to configure in your project if you want to use non-blocking mode.
+ * For IAR, right click project and select "Options", define it in "C/C++ Compiler->Preprocessor->Defined symbols".
+ * For KEIL, click "Options for Target...", define it in "C/C++->Preprocessor Symbols->Define".
+ * For ARMGCC, open CmakeLists.txt and add the following lines,
+ * "SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -DDEBUG_CONSOLE_TRANSFER_NON_BLOCKING")" for debug target.
+ * "SET(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DDEBUG_CONSOLE_TRANSFER_NON_BLOCKING")" for release target.
+ * For MCUXpresso, right click project and select "Properties", define it in "C/C++ Build->Settings->MCU C
+ * Compiler->Preprocessor".
+ *
+ */
+#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
+/*! @brief define the transmit buffer length which is used to store the multi task log, buffer is enabled automatically
+ * when
+ * non-blocking transfer is using,
+ * This value will affect the RAM's ultilization, should be set per platform's capability and software requirement.
+ * If it is configured too small, log maybe missed , because the log will not be
+ * buffered if the buffer is full, and the print will return immediately with -1.
+ * And this value should be multiple of 4 to meet memory alignment.
+ *
+ */
+#ifndef DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN
+#define DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN (0U)
+#endif /* DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN */
+
+/*! @brief define the receive buffer length which is used to store the user input, buffer is enabled automatically when
+ * non-blocking transfer is using,
+ * This value will affect the RAM's ultilization, should be set per platform's capability and software requirement.
+ * If it is configured too small, log maybe missed, because buffer will be overwrited if buffer is too small.
+ * And this value should be multiple of 4 to meet memory alignment.
+ *
+ */
+#ifndef DEBUG_CONSOLE_RECEIVE_BUFFER_LEN
+#define DEBUG_CONSOLE_RECEIVE_BUFFER_LEN (0U)
+#endif /* DEBUG_CONSOLE_RECEIVE_BUFFER_LEN */
+
+/*!@ brief Whether enable the reliable TX function
+ * If the macro is zero, the reliable TX function of the debug console is disabled.
+ * When the macro is zero, the string of PRINTF will be thrown away after the transmit buffer is full.
+ */
+#ifndef DEBUG_CONSOLE_TX_RELIABLE_ENABLE
+#define DEBUG_CONSOLE_TX_RELIABLE_ENABLE (0U)
+#endif /* DEBUG_CONSOLE_TX_RELIABLE_ENABLE */
+
+#else
+#define DEBUG_CONSOLE_TRANSFER_BLOCKING
+#endif /* DEBUG_CONSOLE_TRANSFER_NON_BLOCKING */
+
+/*!@ brief Whether enable the RX function
+ * If the macro is zero, the receive function of the debug console is disabled.
+ */
+#ifndef DEBUG_CONSOLE_RX_ENABLE
+#define DEBUG_CONSOLE_RX_ENABLE (1U)
+#endif /* DEBUG_CONSOLE_RX_ENABLE */
+
+/*!@ brief define the MAX log length debug console support , that is when you call printf("log", x);, the log
+ * length can not bigger than this value.
+ * This macro decide the local log buffer length, the buffer locate at stack, the stack maybe overflow if
+ * the buffer is too big and current task stack size not big enough.
+ */
+#ifndef DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN
+#define DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN (128U)
+#endif /* DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN */
+
+/*!@ brief define the buffer support buffer scanf log length, that is when you call scanf("log", &x);, the log
+ * length can not bigger than this value.
+ * As same as the DEBUG_CONSOLE_BUFFER_PRINTF_MAX_LOG_LEN.
+ */
+#ifndef DEBUG_CONSOLE_SCANF_MAX_LOG_LEN
+#define DEBUG_CONSOLE_SCANF_MAX_LOG_LEN (20U)
+#endif /* DEBUG_CONSOLE_SCANF_MAX_LOG_LEN */
+
+/*! @brief Debug console synchronization
+ * User should not change these macro for synchronization mode, but add the
+ * corresponding synchronization mechanism per different software environment.
+ * Such as, if another RTOS is used,
+ * add:
+ *  #define DEBUG_CONSOLE_SYNCHRONIZATION_XXXX 3
+ * in this configuration file and implement the synchronization in fsl.log.c.
+ */
+/*! @brief synchronization for baremetal software */
+#define DEBUG_CONSOLE_SYNCHRONIZATION_BM 0
+/*! @brief synchronization for freertos software */
+#define DEBUG_CONSOLE_SYNCHRONIZATION_FREERTOS 1
+
+/*! @brief RTOS synchronization mechanism to avoid multitask log print mess.
+ * If other RTOS is used, you can implement the RTOS's specific synchronization mechanism in fsl.log.c
+ */
+
+#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
+#if (defined(SDK_OS_FREE_RTOS) || defined(FSL_RTOS_FREE_RTOS))
+#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_FREERTOS
+#else
+#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_BM
+#endif /* SDK_OS_FREE_RTOS || FSL_RTOS_FREE_RTOS */
+#else
+#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_BM
+#endif /* DEBUG_CONSOLE_TRANSFER_NON_BLOCKING */
+
+/*! @brief Echo function support */
+#define DEBUG_CONSOLE_ENABLE_ECHO_FUNCTION 0
+
+/*********************************************************************/
+
+/***************Debug console other configuration*********************/
+/*! @brief Definition to printf the float number. */
+#ifndef PRINTF_FLOAT_ENABLE
+#define PRINTF_FLOAT_ENABLE 0U
+#endif /* PRINTF_FLOAT_ENABLE */
+
+/*! @brief Definition to scanf the float number. */
+#ifndef SCANF_FLOAT_ENABLE
+#define SCANF_FLOAT_ENABLE 0U
+#endif /* SCANF_FLOAT_ENABLE */
+
+/*! @brief Definition to support advanced format specifier for printf. */
+#ifndef PRINTF_ADVANCED_ENABLE
+#define PRINTF_ADVANCED_ENABLE 0U
+#endif /* PRINTF_ADVANCED_ENABLE */
+
+/*! @brief Definition to support advanced format specifier for scanf. */
+#ifndef SCANF_ADVANCED_ENABLE
+#define SCANF_ADVANCED_ENABLE 0U
+#endif /* SCANF_ADVANCED_ENABLE */
+
+/*! @brief Definition to select virtual com(USB CDC) as the debug console. */
+#ifndef BOARD_USE_VIRTUALCOM
+#define BOARD_USE_VIRTUALCOM 0U
+#endif
+/*******************************************************************/
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+
+#endif /* _FSL_DEBUG_CONSOLE_CONF_H_ */
+