Custom Auto-generated Configs

[no ci]

generated/controllers/generated/rusefi_generated_BMW-ECU.h

@@ -1254,6 +1254,7 @@
 #define PROTOCOL_WA_CHANNEL_3 "input3"
 #define PROTOCOL_WA_CHANNEL_4 "input4"
 #define RANGE_INPUT_COUNT 6
+#define REBOOT_COMMAND 0xbb
 #define SCRIPT_CURVE_16 16
 #define SCRIPT_CURVE_8 8
 #define SCRIPT_CURVE_COUNT 6
@@ -1292,7 +1293,7 @@
 #define show_Proteus_presets false
 #define show_test_presets true
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 3044210534
+#define SIGNATURE_HASH 2563999413
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1672,6 +1673,7 @@
 #define ts_show_onboard_accelerometer true
 #define ts_show_output_diag true
 #define ts_show_popular_vehicles true
+#define ts_show_reboot_to_dfu true
 #define ts_show_reset_calibrations false
 #define ts_show_rotary true
 #define ts_show_sd_card true
@@ -1720,7 +1722,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI main.2024.08.02.BMW-ECU.3044210534"
+#define TS_SIGNATURE "rusEFI main.2024.08.03.BMW-ECU.2563999413"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

generated/controllers/generated/signature_BMW-ECU.h

@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 3044210534
-#define TS_SIGNATURE "rusEFI main.2024.08.02.BMW-ECU.3044210534"
+#define SIGNATURE_HASH 2563999413
+#define TS_SIGNATURE "rusEFI main.2024.08.03.BMW-ECU.2563999413"

generated/tunerstudio/generated/rusefi_BMW-ECU.ini

@@ -38,12 +38,12 @@ enable2ndByteCanID = false
 
 [MegaTune]
  ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI main.2024.08.02.BMW-ECU.3044210534"
+	signature	= "rusEFI main.2024.08.03.BMW-ECU.2563999413"
 
 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI main.2024.08.02.BMW-ECU.3044210534" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI main.2024.08.03.BMW-ECU.2563999413" ; signature is expected to be 7 or more characters.
 
 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@@ -100,7 +100,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","On-board Battery Sense (A0)","Analog Inputs 1 (A1)","Analog Inputs 2 (A2)","Analog Inputs 3 (A3)","Analog Inputs 4 (A4)","On-board MAP (A5)","Analog Inputs 6 (A6)","Analog Inputs 7 (A7)","On-board BARO (B0)","Analog Inputs 9 (B1)","Analog Inputs 10 (C0)","Primary On-board O2 (C1)","Secondary On-board O2 (C2)","Analog Inputs 13 (C3)","Analog Inputs 14 (C4)","Analog Inputs 15 (C5)"
 
 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Aug 02 16:46:32 UTC 2024
+; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Aug 03 16:44:54 UTC 2024
 
 pageSize            = 22960
 page = 1
@@ -9390,7 +9390,7 @@ dialog = tcuControls, "Transmission Settings"
 		commandButton = "Idle Second Air Valve", cmd_test_second_idle_valve
 		commandButton = "Stop Engine", cmd_stop_engine
 		commandButton = "Write Config", cmd_write_config
-		commandButton = "Reset ECU", cmd_reset_controller
+		commandButton = "Reboot ECU", cmd_reset_controller
 		commandButton = "Reset to DFU", cmd_dfu
 		commandButton = "Reset to OpenBLT", cmd_openblt
 		commandButton = "No flash Burn mode", cmd_burn_without_flash