Packet Sender is an open source utility to allow sending and receiving TCP and UDP packets. The mainline branch officially supports Windows, Mac, and Desktop Linux (with Qt). Other places may recompile and redistribute Packet Sender. Packet Sender is free and licensed GPL v2 or later. It can be used for both commercial and personal use.
- Controlling network-based devices in ways beyond their original apps
- Test automation (using its command line tool)
- Testing network APIs (using the built-in TCP and UDP clients)
- Malware analysis (using the built-in UDP and TCP servers)
- Testing network connectivity/firewalls (by having 2 Packet Senders talk to each other)
- Tech support (by sending customers a portable Packet Sender with pre-defined settings and packets)
Official releases of Packet Sender can be downloaded at PacketSender.com. Some places redistribute Packet Sender.
Some knowledge of basic network protocols is a prerequisite to using Packet Sender. Beyond that, Packet Sender was designed to be very easy to use. Simply start using it.
- Twitter: @NagleCode
- You may also track this project on GitHub.
- Secure Anonymous Email: DanNagle.com/contact
Packet Sender has a "portable" mode. At launch, it will look for packets.ini and ps_settings.ini in its run-time directory. Windows users, this directory is the same place as the .exe. For Mac users, this run-time directory is at "PacketSender.app/Contents/MacOS". If INI files are found, it will use them instead of %APPDATA%" or "Library/Application Support".
By default, Packet Sender's built-in servers are configured to support IPv4. If you wish to use IPv6, there is a toggle switch at the bottom right. Click to switch between IPv4 / IPv6.
Packet Sender's GUI client sender and CLI will detect the type of IP address being used and bind appropriately to send the packet. Note that you must include a scope ID to send.
Packet Sender is identical for all the desktop versions. The only difference is its theme to match the operating system.
- In the bottom right, there are UDP server and TCP server status and port. You can click to activate or deactivate these.
- There is also IPv4 Mode and IPv6 Mode. Click to toggle between server modes.
- During packet resending, there will be a button to cancel all resends.
- Please check your firewall. Windows aggressively blocks TCP-based servers. Packet Sender will still work if the firewall blocks it, but it can't receive unsolicited TCP-based packets.
- In the table, there is a list of saved packets. You can double-click to directly edit fields in this table.
- Select multiple packets to enable "Multi-Send". Selected packets are shown in a quick-send area above the traffic log.
- Fields can be rearranged by drag-and-drop in the settings menu.
- A resend value of "0" means it is a single-shot packet.
- A packet has a name, destination address (domains will trigger an IP lookup), port, and data associated with it.
- Click "Send" to immediately send. Click "Save" to send later.
- For IPv6 sending, you will also need the scope ID.
- Packet Sender supports mixed ASCII and HEX notation:
- \XX gets translated to XX in hex
- \n, \r, \t will get translated to 0A, 0D, and 09
- HEX numbers are space delimited
- Example ASCII: hello world\r
- Example HEX: 68 65 6c 6c 6f 20 77 6f 72 6c 64 0d
- You may save a packet directly from the traffic log. You will be prompted for a name, and the source address and port will be switched for your convenience.
- An optional response can be sent. The same response is used for TCP and UDP.
Packet Sender supports up to 5 smart responses. To use it, disable normal responses.
- Packet Sender will compare the packet within the encoding you choose.
- Packet Sender translates the encoding before sending out the reply.
- The available encodings are:
- Mixed ASCII -- The standard Packet Sender way of encoding ASCII along with non-printable characters
- HEX -- Packet Sender's normal HEX encoding
- EBCDIC -- An encoding used mostly by IBM mainframes. The input field is normal Mixed ASCII and is translated when performing the comparison and sending.
Packet Sender supports these macros when sending responses:
- {{DATE}} -- Sends the current date in "yyy-mm-dd" format.
- {{TIME}} -- Sends the current time in "hh:mm:ss ap" format.
- {{UNIXTIME}} -- Sends the current epoch time stamp.
- {{RANDOM}} -- Sends a random number ranging from either 0 to 32767 or 2147483647, depending on 32-bit or 64-bit (default installer for Windows is 32-bit. Mac is 64-bit). Packet Sender will swap the macro with real values before sending.
Packet Sender supports persistent connections via a separate UI dialog. It is enabled by checkbox on the main window.
- Any number of persistent connections can be created.
- Previously saved packets can be loaded in the drop-down.
- There is a "raw" view and "ASCII" view. The ASCII view is useful to troubleshoot data that is not printed by the raw view.
- Traffic is also saved in the main window traffic log.
- The timer in the bottom lefts starts as soon as a valid data packet is sent. It stops when the server closes the connection.
- You may optionally append a carriage return when you quick-send by hitting the return key. This is useful for command-prompt menus over TCP connections.
Persistent connections is not supported via the command line. Persistent connections are not supported in the server.
Packet Sender has a built-in subnet calculator. It is under the Tools menu.
- The log window will display non-loopback IPv4 addresses found on your computer.
- The top left field allow inputting an IPv4 address.
- The field below is for a subnet, either X.X.X.X or /XX notation.
- The results of the calculation are on the right.
- The field below is a quick check to see if an IPv4 is within one of your subnets.
- IPv4 Mode or IPv6 Mode in the servers. This is identical to the toggle switch.
- The traffic log and packet table is divided by a draggable splitter. This splitter can also be collapsed on either side.
- Copy to the clipboard the raw packet data (instead of a translation -- my personal preference)
- Resending can be auto-cancelled after X number of packets. Set to 0 to resend forever.
- Traffic log can be set to roll at 100 entries.
- Import/Export of packets is available via menus.
- Attempt receive before send (some servers expect this behavior).
- 500 ms delay before sending data (some servers are slow).
- Enable keyboard shortcut for ASCII --> EBCDIC translation.
The command line extension used in Windows installations is .com. Using .exe will launch the GUI. Leave off the extension and Windows will choose the correct program. The same executable controls the command line and GUI for Mac and Linux operating systems.
The command line system in Packet Sender follows the same pattern as other Linux utilities. It has a long name (such as --version) and a short name (such as -v). These options can be arranged in any order and Packet Sender will parse them correctly. The last 3 options are positional and must appear last. They are IP, port, and data. These last options are optional if using a stored packet.
packetsender --help
Usage: packetsender [options] address port data
Packet Sender is a Network TCP and UDP Test Utility by Dan Nagle
See http://PacketSender.com/ for more information.
Options:
-?, -h, --help Displays this help.
-v, --version Displays version information.
-q, --quiet Quiet mode. Only output received data.
-x, --hex Parse data as hex (default).
-a, --ascii Parse data as mixed-ascii (like the GUI).
-A, --ASCII Parse data as pure ascii (no \xx translation).
-w, --wait <milliseconds> Wait up to <milliseconds> for a response after sending. Zero means do not wait (Default).
-f, --file <path> Send contents of specified path. Max 1024 for UDP, 10 MiB for TCP.
-b, --bind <port> Bind port. Default is dynamic.
-t, --tcp Send TCP (default).
-u, --udp Send UDP.
-n, --name <name> Send previously saved packet named <name>. Other options overrides saved packet parameters.
-Arguments:
-address Destination address. Optional for saved packet.
-port Destination port. Optional for saved packet.
-data Data to send. Optional for saved packet.
packetsender -taw 500 packetsender.com 22 "Hello\nWorld"
TCP (56620)://192.185.38.130 48 65 6c 6c 6f 0a 57 6f 72 6c 64
Response Time:5:51:37.042 pm
Response HEX:53 53 48 2D 32 2E 30 2D 4F 70 65 6E 53 53 48 5F 35 2E 33 70 31 20 44 65 62 69 61 6E 2D 33 75 62 75 6E 74 75 33 2E 31 2E 49 53 2E 31 30 2E 30 34 0D 0A
Response ASCII:SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu3.1.IS.10.04\r\n
The only dependency is Qt SDK. Here is how to build the app.
- Download the Qt installer from http://www.qt.io/download-open-source/
- Let it install MingGW if you don't have a compiler.
- Open the project PacketSender.pro
- Build! Qt is the only dependency!
Here is the sequence of commands for Ubuntu 15.04. Please adapt to your Linux platform. Packet Sender requires no additional libraries beyond the stock Qt SDK.
If you are feeling adventurous, feel free to build from the master branch.
sudo apt-get update
sudo apt-get install qt5-default build-essential
wget https://github.com/dannagle/PacketSender/archive/(Version).tar.gz
tar -xzvf (Version).tar.gz
cd PacketSender-(Version)/src
qmake
make
To run use:
./PacketSender
If it doesn't run, you may need to set it executable
chmod a+x PacketSender
Missing a feature? You can hire me to add it to Packet Sender.
The abandoned mobile versions are written in Java and Swift and are MIT Licensed.
The desktop version is by far more capable and more popular and is now the sole focus of the project.
The Packet Sender web site is also open source.
GPL v2 or Later. Contact me if you require a different license.
Packet Sender is wholly owned and copyright © - @NagleCode - DanNagle.com - PacketSender.com