The code in this repository allows you to measure a DHT sensor with your Raspberry Pi or BeagleBone device and publish it to MQTT in a format suitable for Home Assistant.
Clone the repository and install the required dependencies.
git clone https://www.github.com/berndie/dht_mqtt
cd dht_mqtt
(sudo) pip(3) install -r requirements.txt
Copy config.ini.dist to config.ini and edit this file to suit your specific
needs. You need to at least set the pin and host in the configuration file.
cp config.ini.dist config.ini
nano config.ini
Run the main script
(sudo) python(3) main.py
To install this script as a service, run:
sudo python(3) install_service.py
This will install a dht_mqtt.service in /lib/systemd/system/.
You can start the service by running:
sudo systemctl start dht_mqtt.service
You can enable the service to run on boot by running:
sudo systemctl enable dht_mqtt.service
- Unittesting
- Enable CI on this repository
- Checking compatibility for different python versions
MIT License
Copyright (c) 2020 Bernd Accou
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.