3030 Haribo Edition

credit: jb3872 @ slack

Disclaimer

you do this modification at your own risk

we are not responsible for any damages / injuries that might arise from the usage of all material, including but not limited to ideas, documentation, diagrams, that you get from this github. All precautions and safety protection should be taken and only attempt it if you are experienced in this area.

Introduction

Inspiration for the project came from davtr mk2 conversion Prusa i3 MK2-X

The use of 3030 extrusion makes the frame very rigid and square. It takes a lot of the guess work out of building the MK2

The name is from the candy that we get when we buy the MK2 kits. Somebody jokingly said that's a good name and it sort of stuck.

Contact us

Please join our Slack if you want to reach us.

Haribo in the wild

S3D base settings

• 60mm/s 60% other speeds 30% first layer speed
• 80mm/s 50% other speeds 25% first layer speed
• 100mm/s 40% other speeds 20% first layer speed
• 120mm/s 30% other speeds 15% first layer speed

#	slack handle	frame/color	60mm/s	80mm/s	>100mm/s
0	jtktam	Silver/Orange Silver/Red Black/Yellow	Yes	Yes	Yes
1	geoffreyc	Silver/Orange	Yes	Yes	Yes
2	ar.o.be	Silver/Pineapple	Yes	Yes	Yes
3	joostvwillegen	Black/Metallic Gray Yellow/White	Yes	Yes	Yes
4	chinooktx	Silver/Black	Yes	Yes	Yes
5	skuiper	Black/Purple+Green	Yes	Yes
6	JJ	Black/Violet
7	satmanager	Silver/Cherry Red	Yes	Yes
8	ryanneufeld	Black/Black
9	tricko	Black/Black+White	Yes	Yes	Yes
10	cube
11	johnocfii	Black/Jade
12	jasonh	Silver/Transparent	Yes	Yes	Yes
13	jonasrh	Black/GITD green
14	evad	Silver/Silver	Yes	Yes	Yes
15	patrik
16	abjorshammar
17	stevendpclark
18	arb	Silver/Lime Green
19	philsburry	Silver/Translucent Blue
20	kaiserheld
21	tcolby	Silver/White
22	ollietwist	Silver/Orange
23	Jb3872	Black/Burgundy
24	unkle_rukus	Black/Neon Green
25	carre55	Black/Orange
26	dark-nico	Silver/Dark Green
27	olliet	Silver/Patchwork Colors
28	cova	Black/Translucent Blue
29
30
31
32
33
34
35
36
37
38
39
40