Helper for setting up storage for tests.
Some tests need more than a temporary directory on the local file system. One example is testing block device with 4k sector size, or testing a filesystem on top of such a block device.
You can create storage using loop devices and mounts in test fixtures, but creating devices and mounts requires root. Do you really want to run all your tests as root, when the code under test should not run as root?
The userstorage tool solves this problem by creating storage for tests before running the tests, and making the storage available to the current user. Once you created the storage, you can run the tests quickly as yourself directly from your editor.
On Fedora / CentOS you need to install these packages:
yum install e2fsprogs sudo util-linux xfsprogs
Some packages are typically installed on your machine, but you may need to add them to CI environment or container.
Use pip:
python3 -m pip install --user userstorage
Use python2 if you need to run on a distribution without python3.
The userstorage tool creates storage based on configuration file that you must provide.
The configuration module is used both by the userstorage tool to provision the storage, and by the tests consuming the storage.
The configuration module typically starts by importing the required backends:
from userstorage import File
The configuration module must define these names:
# Where storage is provisioned.
BASE_DIR = "/path/to/my/storage"
# Storage configurations needed by the tests.
BACKENDS = {}
See example_config.py for example configuration used by the tests for this project.
To create the storage described in example_config.py, run:
userstorage create example_config.py
This can be run once when creating a development environment, and must be run again after rebooting the host.
If you want to delete the storage, run:
userstorage delete example_config.py
There is no need to delete the storage normally. The loop devices are backed up by sparse files and do not consume much resources.
See test/consume_test.py for example test module consuming storage set up by userstorage tool, and the example_config.py module.
Note that some storage may not be available on some systems. Your tests can check if a storage is available and skip or mark the test as xfail if needed.
Reusing the same storage for all tests introduce the problem of old test data breaking other tests, or causing test to pass when they should fail.
To avoid this issues, you should call backend's setup() methods before using the storage in a test, and teardown() after running the tests. This ensures that old data from other tests will not be seen by this test.
The userstorage tool creates this directory layout in the BASE_DIR defined in the configuration module:
$ tree /var/tmp/example-storage/
/var/tmp/example-storage/
├── block-4k-backing
├── block-4k-loop -> /dev/loop2
├── block-512-backing
├── block-512-loop -> /dev/loop3
├── file-4k-backing
├── file-4k-loop -> /dev/loop4
├── file-4k-mount
│ ├── file
│ └── lost+found [error opening dir]
├── file-512-backing
├── file-512-loop -> /dev/loop5
└── file-512-mount
├── file
└── lost+found [error opening dir]
The symbolic links (e.g. file-4k-loop) link to the loop devices created by the tool (/dev/loop4), and used to delete the storage later.
The actual file used for the tests are created inside the mounted filesystem (/var/tmp/example-storage/file-4k-mount/file).
- sanlock - using very early version of this tool
- vdsm - using more recent version of this tool
(Please add your project here)
If you found a bug, please open an issue.
If you have an idea for improving this tool, please open an issue to discuss the idea.
For trivial changes please send a pull request.
To run the tests you need to install tox. You can use tox from your distribution (python2-tox or python3-tox on Fedora), or install it using pip.
Before running the tests, create the example storage:
python3 -m userstorage create example_config.py
To run the tests:
tox
If you want to change storage layout, best delete the example storage:
python3 -m userstorage delete example_config.py