palette_firmware

Final dipswitch configuration 1: OFF 2: OFF 3: ON (for GPIO_NUM_15 access) 4: ON (for GPIO_NUM_13 access) 5: ON (for GPIO_NUM_12 access) 6: ON (for GPIO_NUM_14 access) 7: ON (for aux input detection) 8: OFF GPIO_NUM_0 - n/a - Automatic Upload, I2S MCLK (wouldn't be able to use automatic reset, second furthest pin from usb) GPIO_NUM_2 - n/a - Automatic Upload, MicroSD D0 (wouldn't be able to use automatic reset, fourth furthest pin from usb) RX - n/a - UART0 RX (wouldn't be able to use any HOST -> ESP32 UART control) TX - n/a - UART0 TX (can't use USB debugging though...) GPIO_NUM_12 - 5 - JTAG MTDI, MicroSD D2, Aux signal detect GPIO_NUM_13 - 4 - JTAG MTCK, MicroSD D3, Audio Vol- (TP) GPIO_NUM_14 - 6 - JTAG MTMS, MicroSD CLK GPIO_NUM_15 - 3 - JTAG MTDO, MicroSD CMD Other useful pins: GPIO_NUM_22 - green led GPIO_NUM_19 - aux insert detection GPIO_NUM_12 - aux insert detection GPIO_NUM_21 - PA enable output

Core configuration 1: ARDUINO 1: FFT 1: FastLED 0: BTDM 0: BLUEDROID 0: WIFI