V1.8.1 - The device reuse release

Misc:

• New feature: Device instance catalog.
  Multiple EasyMCP2221.Device instances pointing to the same physical device can cause conflict.
  EasyMCP2221 keeps an internal catalog of devices initialized in the same program. It tries to detect when
  double initialization happens and return the same object to prevent conflicts.
• Improved device selection flow.
• Test for device selection and catalog.

I2C:

• Added serial number to SMBus initialization parameters.

Documentation:

• Examples with ADS1115 ADC.
• Improved device selection flow explanation.
• Add I2C expected performance table in limitations_bugs

v1.8.0 - The multi-device release

Improvements for multiple devices:

• Allow selecting a device via USB serial number.
• Added enable_cdc_serial to locate the matching CDC interface.
• Fixed: State variables were defined as class variables.

Misc:

• Added I2C scan code in I2C_read documentation.
• Removed open timeout unless in reset operation.
• Fixed: Preserve non-default initialization parameters on reset.
• Removed the 5 seconds delay at initialization when no devices found (except when reset is called).

v1.7.2 - The strange delay fix

ADC/DAC:

• Added norm parameter to :func:ADC_read and :func:DAC_write.
• Added LED bar example.

I2C:

• In I2C Slave Helper class, register bytes and register byte order can be indicated in the class constructor.

Misc:

• Removed timeout parameter on USB HID read, introduced in V1.6.1. This parameter causes a delay in some systems (#7) due to unknown reasons. The default timeout is now 1000 ms.

v1.7.1 - The I2C default speed

Full changelog here: Changelog v1.7.1

I2C:

• Set I2C default speed to 100kHz. In some chips, the default speed is 500kHz and can cause trouble with some slave devices or noisy buses. You can adjust it with I2C_speed function.
• Added clock frequency parameter in SMBus class.

Misc:

• Added function revision to get the mayor and minor hardware and firmware revision.
• Fixed test about Interrupt On Change.
• Moved GUI to a separate application on its own repository.

v1.7.0 - The GUI release

See full changelog here: Changelog v1.7.0

ADC/DAC:

• Fixed bug. When GP1, 2 and 3 are all in ADC mode and ADC reference is VDD. If just after reset VRM reference is selected, ADC stops working.

Interrupt on Change:

• Added new section about Interrupt On Change (IOC) detection.
• Renamed function wake_up_config to IOC_config().
• Added IOC_read() to read Interrupt On Change flag.
• Added IOC_clear() to clear Interrupt On Change flag.
• Replaced raising edge with rising edge.

I2C:

• Removed deprecated functions I2C_is_idle and I2C_cancel.

Misc:

• Solved bug USB remote Wake-up is not saved with save_config().
• New behavior for enable_power_management(). Changes are not saved immediately to Flash. Call to save_config() is needed instead.
• New function read_flash_info().
• Device information now returns GPIO designation and default status.
• Document as limitation a weird MCP2221’s bug related to interrupt flag and ADC reference.
• Tkinter GUI

v1.6.3

Update changelog.

v1.6.2

Full Changelog: https://easymcp2221.readthedocs.io/en/stable/history.html#v1-6-2