Added Source-Salesforce

.github/workflows/python.yaml

@@ -9,6 +9,7 @@ on:
       - "source-gladly/**"
       - "source-google-sheets-native/**"
       - "source-hubspot-native/**"
+      - "source-salesforce/**"
   pull_request:
     branches: [main]
     paths:
@@ -17,6 +18,7 @@ on:
       - "source-gladly/**"
       - "source-google-sheets-native/**"
       - "source-hubspot-native/**"
+      - "source-salesforce/**"
 
 concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}
@@ -48,6 +50,9 @@ jobs:
             type: capture
             version: v1
             usage_rate: "0.0"
+          - name: source-salesforce
+            type: capture
+            version: v2
 
     steps:
       - uses: actions/checkout@v4

source-salesforce/README.md

@@ -0,0 +1,132 @@
+# Salesforce Source
+
+This is the repository for the Salesforce source connector, written in Python.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/salesforce).
+
+## Local development
+
+### Prerequisites
+**To iterate on this connector, make sure to complete this prerequisites section.**
+
+#### Minimum Python version required `= 3.9.0`
+
+#### Build & Activate Virtual Environment and install dependencies
+From this connector directory, create a virtual environment:
+```
+python -m venv .venv
+```
+
+This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
+development environment of choice. To activate it from the terminal, run:
+```
+source .venv/bin/activate
+pip install -r requirements.txt
+```
+If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
+
+Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
+used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
+If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
+should work as you expect.
+
+#### Building via Gradle
+You can also build the connector in Gradle. This is typically used in CI and not needed for your development workflow.
+
+To build using Gradle, from the Airbyte repository root, run:
+```
+./gradlew :airbyte-integrations:connectors:source-salesforce:build
+```
+
+#### Create credentials
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/salesforce)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_salesforce/spec.yaml` file.
+Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
+See `integration_tests/sample_config.json` for a sample config file.
+
+**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source salesforce test creds`
+and place them into `secrets/config.json`.
+
+### Locally running the connector
+```
+python main.py spec
+python main.py check --config secrets/config.json
+python main.py discover --config secrets/config.json
+python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
+```
+
+### Locally running the connector docker image
+
+#### Build
+First, make sure you build the latest Docker image:
+```
+docker build . -t airbyte/source-salesforce:dev
+```
+
+You can also build the connector image via Gradle:
+```
+./gradlew :airbyte-integrations:connectors:source-salesforce:airbyteDocker
+```
+When building via Gradle, the docker image name and tag, respectively, are the values of the `io.airbyte.name` and `io.airbyte.version` `LABEL`s in
+the Dockerfile.
+
+#### Run
+Then run any of the connector commands as follows:
+```
+docker run --rm airbyte/source-salesforce:dev spec
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-salesforce:dev check --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-salesforce:dev discover --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-salesforce:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
+```
+## Testing
+Make sure to familiarize yourself with [pytest test discovery](https://docs.pytest.org/en/latest/goodpractices.html#test-discovery) to know how your test files and methods should be named.
+First install test dependencies into your virtual environment:
+```
+pip install ".[tests]"
+```
+### Unit Tests
+To run unit tests locally, from the connector directory run:
+```
+python -m pytest unit_tests
+```
+
+### Integration Tests
+There are two types of integration tests: Acceptance Tests (Airbyte's test suite for all source connectors) and custom integration tests (which are specific to this connector).
+#### Custom Integration tests
+Place custom tests inside `integration_tests/` folder, then, from the connector root, run
+```
+python -m pytest integration_tests
+```
+#### Acceptance Tests
+Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.io/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
+To run your integration tests with acceptance tests, from the connector root, run
+```
+docker build . --no-cache -t airbyte/source-salesforce:dev \
+  && python -m pytest -p connector_acceptance_test.plugin
+```
+To run your integration tests with docker
+
+### Using gradle to run tests
+All commands should be run from airbyte project root.
+To run unit tests:
+```
+./gradlew :airbyte-integrations:connectors:source-salesforce:unitTest
+```
+To run acceptance and custom integration tests:
+```
+./gradlew :airbyte-integrations:connectors:source-salesforce:integrationTest
+```
+
+## Dependency Management
+All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
+We split dependencies between two groups, dependencies that are:
+* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
+* required for the testing need to go to `TEST_REQUIREMENTS` list
+
+### Publishing a new version of the connector
+You've checked out the repo, implemented a million dollar feature, and you're ready to share your changes with the world. Now what?
+1. Make sure your changes are passing unit and integration tests.
+1. Bump the connector version in `Dockerfile` -- just increment the value of the `LABEL io.airbyte.version` appropriately (we use [SemVer](https://semver.org/)).
+1. Create a Pull Request.
+1. Pat yourself on the back for being an awesome contributor.
+1. Someone from Airbyte will take a look at your PR and iterate with you to merge it into master.

source-salesforce/__main__.py

@@ -0,0 +1,26 @@
+import urllib
+from flow_sdk import shim_airbyte_cdk
+from .source_salesforce import SourceSalesforce
+
+
+
+
+shim_airbyte_cdk.CaptureShim(
+    delegate=SourceSalesforce(),
+    oauth2={
+    "provider": "salesforce",
+    "authUrlTemplate": (
+      r"https://{{#config.is_sandbox}}test{{/config.is_sandbox}}{{^config.is_sandbox}}login{{/config.is_sandbox}}.salesforce.com/services/oauth2/authorize?client_id={{#urlencode}}{{{ client_id }}}{{/urlencode}}&redirect_uri={{#urlencode}}{{{ redirect_uri }}}{{/urlencode}}&response_type=code&state={{#urlencode}}{{{ state }}}{{/urlencode}}"
+      ),
+    "accessTokenUrlTemplate": r"https://{{#config.is_sandbox}}test{{/config.is_sandbox}}{{^config.is_sandbox}}login{{/config.is_sandbox}}.salesforce.com/services/oauth2/token",
+    "accessTokenBody": (
+      "grant_type=authorization_code"
+      r"&client_id={{#urlencode}}{{{ client_id }}}{{/urlencode}}"
+      r"&client_secret={{#urlencode}}{{{ client_secret }}}{{/urlencode}}"
+      r"&redirect_uri={{#urlencode}}{{{ redirect_uri }}}{{/urlencode}}&code={{#urlencode}}{{{ code }}}{{/urlencode}}"
+    ),
+    "accessTokenHeaders": {"content-type": "application/x-www-form-urlencoded"},
+    "accessTokenResponseMap": {"refresh_token": "/refresh_token"}
+},
+    usesSchemaInference=False,
+).main()

source-salesforce/config.yaml

@@ -0,0 +1,21 @@
+credentials:
+    auth_type: Client
+    client_id_sops: ENC[AES256_GCM,data:w+QlOJj6HMkY8LXI+rhkU+WGzrC/pz70nnZMpqrYbLcLBBnd4MAvPOJrY9GCa1CazfzavL6ATXZtMO2et7IT8PH5i4OkhHmXrcRpYvoQFYqVPOsXMw==,iv:lto0AF8YNlhb9FIntaqVRcyxaEZSxhefzCcDx/2yQFw=,tag:BAIe1Yezo1mnaxz/uPfbaQ==,type:str]
+    client_secret_sops: ENC[AES256_GCM,data:MTa+Cv+YH7v8gy/LTsviFW9oocCDWp86g7aB5OVnO6OJLPChbNAuC7qtAzNKiZu2DVKof9tmrjqQcWxhdVEMJA==,iv:oZg6cFFx9Oq3AZCGsGRtusXEZKyMVMKbG6SCANxjwWg=,tag:iyHdLX2mUFKQfo3oJRCneg==,type:str]
+    refresh_token_sops: ENC[AES256_GCM,data:/TaTSN6bLz+eZxZhWPYj3ESFZrjQa7XWbzosSNc64Y3Y320n2il9OW2PUzt03rA4FcciEeFAN5IZAm3G+0VnO6ORFo4Bb2OuO7ZkEq9W1NlCen6ulRmb,iv:iWxXdwyum8STeLupLNiFDMcqOsCe/0LUMp6sUkydXHU=,tag:w4n604HbGtpo2JjbUPbIUg==,type:str]
+is_sandbox: false
+start_date: "2020-01-01"
+sops:
+    kms: []
+    gcp_kms:
+        - resource_id: projects/estuary-theatre/locations/us-central1/keyRings/connector-keyring/cryptoKeys/connector-repository
+          created_at: "2024-03-08T05:31:16Z"
+          enc: CiQAdmEdwvWWci8hmYfDEI3t5/hMDMNae/7Pq6THGr3n3y+b8CwSSQCVvC1zN8IPDTYZdbVo11k7xVAeJSNRRAIOPpU+ARe73YpQtoMP92xJs0VasYa6gxjB53wWKIHiGxYJr5rYtJfvE6evYRQFkDY=
+    azure_kv: []
+    hc_vault: []
+    age: []
+    lastmodified: "2024-03-11T10:03:34Z"
+    mac: ENC[AES256_GCM,data:hbOhtVqgpp3Qjb2J5v0O16tZR7OOaRXhrx989jOWaPg/GRnmT2Wy7DIcT0OKtIR/Xz39xW7AUqYbig6uleMKMpqPKawvd6sPhox+0FfOZzcJDiNsn6P//mJ0/armwS9KnZk+tybhTjJMzHtaI4llp9IBdWJvLncvtZ2PLhA3oqE=,iv:nexmF7WR7PlN9aPVsx+VybCpfE6OY/yWaIPY/0wmbnU=,tag:3Oc35qCorGulnYggINzdPQ==,type:str]
+    pgp: []
+    encrypted_suffix: _sops
+    version: 3.8.1

source-salesforce/metadata.yaml

@@ -0,0 +1,24 @@
+data:
+  allowedHosts:
+    hosts:
+      - "*.salesforce.com"
+  connectorSubtype: api
+  connectorType: source
+  definitionId: b117307c-14b6-41aa-9422-947e34922962
+  dockerImageTag: 2.0.14
+  dockerRepository: airbyte/source-salesforce
+  githubIssueLabel: source-salesforce
+  icon: salesforce.svg
+  license: MIT
+  name: Salesforce
+  registries:
+    cloud:
+      dockerImageTag: 2.0.9
+      enabled: true
+    oss:
+      enabled: true
+  releaseStage: generally_available
+  documentationUrl: https://docs.airbyte.com/integrations/sources/salesforce
+  tags:
+    - language:python
+metadataSpecVersion: "1.0"