Following instructions are provided without any warranty, and may even get you in trouble legally.
The instructions are provided for testing, learning, preventing e-waste, and should be use with care.
We (including contributers + commentators) are not responsible for any damage to your device(s) or any legal issues.
This repo provides information on how one may possibly enable additional or change WiFi-channels, and TX-power on ASUS Merlin provided routers. Please use the instructions will care, and read the disclaimer before applying any changes.
The purpose is to adjust a router of AP to the legal state of the country (e.g. you bought an ASUS router in JAP, and want to re-use again it in GER). The current method is focussing on exposed nvram variables, and overrule them again when a service or event has been restarted or dispatched.
The adjusted nvram settings have been tested on the ASUS RT-AX58U v1 (Asuswrt-Merlin) & ASUS ZenWiFi AX XT8 v2 (AiMesh node - stock firmware).
Note: do not ask for any support on the SNBForums, ASUS or any (official) Merlin related projects. See the Troubleshooting section to reset any changes, or remove any adjustments first if you need to ask for support/help.
Note: most modern wireless devices use something called Location Aware Regulatory (LAR), and other hidden signals to check the origin of the country. This means that even changing/forcing your router's WiFi-settings, your clients may choose to ignore it (use a fallback-mode) or do not connect at all.
A massive shoutout goes out to the contributes on my previous gist, and members of the SNBForums!
See https://www.htpcguides.com/enable-ssh-asus-routers-without-ssh-keys/ for instructions. The guide explains both the usage of a password and SSH-keys.
Login into router using SSH (password or key):
- Run
nvram dump > dump.txt - Use
scpto copy it to your working machine or copy the contents ofnvram dumpdirectly to somewhere safe - Make sure
Enable JFFS custom scripts and configsis enabled and working in System settings - Reboot router
See https://github.com/RMerl/asuswrt-merlin.ng/wiki/User-scripts for details.
- Make sure JFFS has been enabled:
nvram set jffs2_on=1
nvram set jffs2_scripts=1
nvram commit-
Create/update the required
/jffs/scriptsfiles, see given example for details, and paste yournvramoverwrites into the/jffs/scripts/wlboostfile. -
Make sure scripts are executable:
chmod a+rx /jffs/scripts/*- Test the changes:
/jffs/scripts/wlboost- If everything keeps working, reboot the router:
reboot- You may want to permanently write the changes into nvram to let it survive on a reboot:
/jffs/scripts/wlboost
nvram commitTo make changes persistent, adjust the /jffs/scripts/wlboost file.
Restart the wireless service using service restart_wireless or by using the scMerlin addon. These methods are preferred, since the router itself may overrule values.
It's possible to restore factory nvram settings by using a hard reset:
This will clear all overwrites and restores factory defaults.