[LLCC68] Add override begin FSK and LR-FHSS methods (#1405)

src/modules/LLCC68/LLCC68.cpp

@@ -37,6 +37,56 @@ int16_t LLCC68::begin(float freq, float bw, uint8_t sf, uint8_t cr, uint8_t sync
   return(state);
 }
 
+int16_t LLCC68::beginFSK(float freq, float br, float freqDev, float rxBw, int8_t power, uint16_t preambleLength, float tcxoVoltage, bool useRegulatorLDO) {
+  // execute common part
+  int16_t state = SX126x::beginFSK(br, freqDev, rxBw, preambleLength, tcxoVoltage, useRegulatorLDO);
+  if(state == RADIOLIB_ERR_CHIP_NOT_FOUND) {
+    // bit of a hack, but some LLCC68 chips report as "SX1261", try that
+    // for full discussion, see https://github.com/jgromes/RadioLib/issues/1329
+    chipType = RADIOLIB_SX1261_CHIP_TYPE;
+    state = SX126x::beginFSK(br, freqDev, rxBw, preambleLength, tcxoVoltage, useRegulatorLDO);
+    RADIOLIB_DEBUG_PRINTLN("LLCC68 version string not found, using SX1261 instead");
+  }
+  RADIOLIB_ASSERT(state);
+
+  // configure publicly accessible settings
+  state = setFrequency(freq);
+  RADIOLIB_ASSERT(state);
+
+  state = SX126x::fixPaClamping();
+  RADIOLIB_ASSERT(state);
+
+  state = setOutputPower(power);
+  RADIOLIB_ASSERT(state);
+
+  return(state);
+}
+
+int16_t LLCC68::beginLRFHSS(float freq, uint8_t bw, uint8_t cr, bool narrowGrid, int8_t power, float tcxoVoltage, bool useRegulatorLDO) {
+  // execute common part
+  int16_t state = SX126x::beginLRFHSS(bw, cr, narrowGrid, tcxoVoltage, useRegulatorLDO);
+  if(state == RADIOLIB_ERR_CHIP_NOT_FOUND) {
+    // bit of a hack, but some LLCC68 chips report as "SX1261", try that
+    // for full discussion, see https://github.com/jgromes/RadioLib/issues/1329
+    chipType = RADIOLIB_SX1261_CHIP_TYPE;
+    state = SX126x::beginLRFHSS(bw, cr, narrowGrid, tcxoVoltage, useRegulatorLDO);
+    RADIOLIB_DEBUG_PRINTLN("LLCC68 version string not found, using SX1261 instead");
+  }
+  RADIOLIB_ASSERT(state);
+
+  // configure publicly accessible settings
+  state = setFrequency(freq);
+  RADIOLIB_ASSERT(state);
+
+  state = SX126x::fixPaClamping();
+  RADIOLIB_ASSERT(state);
+
+  state = setOutputPower(power);
+  RADIOLIB_ASSERT(state);
+
+  return(state);
+}
+
 int16_t LLCC68::setBandwidth(float bw) {
   RADIOLIB_CHECK_RANGE(bw, 100.0f, 510.0f, RADIOLIB_ERR_INVALID_BANDWIDTH);
   return(SX1262::setBandwidth(bw));

src/modules/LLCC68/LLCC68.h

@@ -40,7 +40,38 @@ class LLCC68: public SX1262 {
       \returns \ref status_codes
     */
     int16_t begin(float freq = 434.0, float bw = 125.0, uint8_t sf = 9, uint8_t cr = 7, uint8_t syncWord = RADIOLIB_SX126X_SYNC_WORD_PRIVATE, int8_t pwr = 10, uint16_t preambleLength = 8, float tcxoVoltage = 0, bool useRegulatorLDO = false);
-
+
+    /*!
+      \brief Initialization method for FSK modem.
+      \param freq Carrier frequency in MHz. Defaults to 434.0 MHz.
+      \param br FSK bit rate in kbps. Defaults to 4.8 kbps.
+      \param freqDev Frequency deviation from carrier frequency in kHz. Defaults to 5.0 kHz.
+      \param rxBw Receiver bandwidth in kHz. Defaults to 156.2 kHz.
+      \param power Output power in dBm. Defaults to 10 dBm.
+      \param preambleLength FSK preamble length in bits. Defaults to 16 bits.
+      \param tcxoVoltage TCXO reference voltage to be set on DIO3. Defaults to 1.6 V.
+      If you are seeing -706/-707 error codes, it likely means you are using non-0 value for module with XTAL.
+      To use XTAL, either set this value to 0, or set SX126x::XTAL to true.
+      \param useRegulatorLDO Whether to use only LDO regulator (true) or DC-DC regulator (false). Defaults to false.
+      \returns \ref status_codes
+    */
+    int16_t beginFSK(float freq = 434.0, float br = 4.8, float freqDev = 5.0, float rxBw = 156.2, int8_t power = 10, uint16_t preambleLength = 16, float tcxoVoltage = 1.6, bool useRegulatorLDO = false);
+
+    /*!
+      \brief Initialization method for LR-FHSS modem. This modem only supports transmission!
+      \param freq Carrier frequency in MHz. Defaults to 434.0 MHz.
+      \param bw LR-FHSS bandwidth, one of RADIOLIB_SX126X_LR_FHSS_BW_* values. Defaults to 722.66 kHz.
+      \param cr LR-FHSS coding rate, one of RADIOLIB_SX126X_LR_FHSS_CR_* values. Defaults to 2/3 coding rate.
+      \param narrowGrid Whether to use narrow (3.9 kHz) or wide (25.39 kHz) grid spacing. Defaults to true (narrow/non-FCC) grid.
+      \param power Output power in dBm. Defaults to 10 dBm.
+      \param tcxoVoltage TCXO reference voltage to be set. Defaults to 1.6 V.
+      If you are seeing -706/-707 error codes, it likely means you are using non-0 value for module with XTAL.
+      To use XTAL, either set this value to 0, or set SX126x::XTAL to true.
+      \param useRegulatorLDO Whether to use only LDO regulator (true) or DC-DC regulator (false). Defaults to false.
+      \returns \ref status_codes
+    */
+    int16_t beginLRFHSS(float freq = 434.0, uint8_t bw = RADIOLIB_SX126X_LR_FHSS_BW_722_66, uint8_t cr = RADIOLIB_SX126X_LR_FHSS_CR_2_3, bool narrowGrid = true, int8_t power = 10, float tcxoVoltage = 1.6, bool useRegulatorLDO = false);
+
     // configuration methods
 
     /*!