Merge branch 'net-next-2025-03-01--00-00' into HEAD

.mailmap

@@ -88,7 +88,6 @@ Antonio Quartulli <[email protected]> <[email protected]>
 Antonio Quartulli <[email protected]> <[email protected]>
 Antonio Quartulli <[email protected]> <[email protected]>
 Antonio Quartulli <[email protected]> <[email protected]>
-Antonio Quartulli <[email protected]> <[email protected]>
 Antonio Quartulli <[email protected]> <[email protected]>
 Anup Patel <[email protected]> <[email protected]>
 Archit Taneja <[email protected]>

Documentation/arch/powerpc/cxl.rst

@@ -18,6 +18,7 @@ Introduction
     both access system memory directly and with the same effective
     addresses.
 
+    **This driver is deprecated and will be removed in a future release.**
 
 Hardware overview
 =================
@@ -453,7 +454,7 @@ Sysfs Class
 
     A cxl sysfs class is added under /sys/class/cxl to facilitate
     enumeration and tuning of the accelerators. Its layout is
-    described in Documentation/ABI/testing/sysfs-class-cxl
+    described in Documentation/ABI/obsolete/sysfs-class-cxl
 
 
 Udev rules

Documentation/arch/s390/driver-model.rst

@@ -244,7 +244,7 @@ information about the interrupt from the irb parameter.
 --------------------
 
 The ccwgroup mechanism is designed to handle devices consisting of multiple ccw
-devices, like lcs or ctc.
+devices, like qeth or ctc.
 
 The ccw driver provides a 'group' attribute. Piping bus ids of ccw devices to
 this attributes creates a ccwgroup device consisting of these ccw devices (if

Documentation/arch/x86/sva.rst

@@ -25,7 +25,7 @@ to cache translations for virtual addresses. The IOMMU driver uses the
 mmu_notifier() support to keep the device TLB cache and the CPU cache in
 sync. When an ATS lookup fails for a virtual address, the device should
 use the PRI in order to request the virtual address to be paged into the
-CPU page tables. The device must use ATS again in order the fetch the
+CPU page tables. The device must use ATS again in order to fetch the
 translation before use.
 
 Shared Hardware Workqueues
@@ -216,7 +216,7 @@ submitting work and processing completions.
 
 Single Root I/O Virtualization (SR-IOV) focuses on providing independent
 hardware interfaces for virtualizing hardware. Hence, it's required to be
-almost fully functional interface to software supporting the traditional
+an almost fully functional interface to software supporting the traditional
 BARs, space for interrupts via MSI-X, its own register layout.
 Virtual Functions (VFs) are assisted by the Physical Function (PF)
 driver.

Documentation/devicetree/bindings/arm/rockchip/pmu.yaml

@@ -53,11 +53,17 @@ properties:
   reg:
     maxItems: 1
 
+  power-controller:
+    type: object
+
+  reboot-mode:
+    type: object
+
 required:
   - compatible
   - reg
 
-additionalProperties: true
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml

@@ -33,6 +33,10 @@ properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    items:
+      - const: nf_clk
+
   dmas:
     maxItems: 1
 
@@ -51,6 +55,7 @@ required:
   - reg-names
   - interrupts
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
@@ -66,7 +71,8 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&nf_clk>;
+        clocks = <&clk>;
+        clock-names = "nf_clk";
         cdns,board-delay-ps = <4830>;
 
         nand@0 {

Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml

@@ -63,6 +63,14 @@ properties:
   "#size-cells":
     const: 0
 
+  airoha,npu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the node used to configure the NPU module.
+      The Airoha Network Processor Unit (NPU) provides a configuration
+      interface to implement hardware flow offloading programming Packet
+      Processor Engine (PPE) flow table.
+
 patternProperties:
   "^ethernet@[1-4]$":
     type: object
@@ -132,6 +140,8 @@ examples:
                      <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 
+        airoha,npu = <&npu>;
+
         #address-cells = <1>;
         #size-cells = <0>;
 

Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml

@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,en7581-npu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha Network Processor Unit for EN7581 SoC
+
+maintainers:
+  - Lorenzo Bianconi <[email protected]>
+
+description:
+  The Airoha Network Processor Unit (NPU) provides a configuration interface
+  to implement wired and wireless hardware flow offloading programming Packet
+  Processor Engine (PPE) flow table.
+
+properties:
+  compatible:
+    enum:
+      - airoha,en7581-npu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: mbox host irq line
+      - description: watchdog0 irq line
+      - description: watchdog1 irq line
+      - description: watchdog2 irq line
+      - description: watchdog3 irq line
+      - description: watchdog4 irq line
+      - description: watchdog5 irq line
+      - description: watchdog6 irq line
+      - description: watchdog7 irq line
+      - description: wlan irq line0
+      - description: wlan irq line1
+      - description: wlan irq line2
+      - description: wlan irq line3
+      - description: wlan irq line4
+      - description: wlan irq line5
+
+  memory-region:
+    maxItems: 1
+    description:
+      Memory used to store NPU firmware binary.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      npu@1e900000 {
+        compatible = "airoha,en7581-npu";
+        reg = <0 0x1e900000 0 0x313000>;
+        interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+        memory-region = <&npu_binary>;
+      };
+    };

Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml

@@ -10,9 +10,6 @@ title:
 maintainers:
   - Marc Kleine-Budde <[email protected]>
 
-allOf:
-  - $ref: can-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -28,6 +25,7 @@ properties:
           - fsl,vf610-flexcan
           - fsl,ls1021ar2-flexcan
           - fsl,lx2160ar1-flexcan
+          - nxp,s32g2-flexcan
       - items:
           - enum:
               - fsl,imx53-flexcan
@@ -43,12 +41,21 @@ properties:
           - enum:
               - fsl,ls1028ar1-flexcan
           - const: fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - nxp,s32g3-flexcan
+          - const: nxp,s32g2-flexcan
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
 
   clocks:
     maxItems: 2
@@ -136,6 +143,35 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,s32g2-flexcan
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Message Buffer interrupt for mailboxes 0-7 and Enhanced RX FIFO
+            - description: Device state change
+            - description: Bus Error detection
+            - description: Message Buffer interrupt for mailboxes 8-127
+        interrupt-names:
+          items:
+            - const: mb-0
+            - const: state
+            - const: berr
+            - const: mb-1
+      required:
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names: false
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml

@@ -40,7 +40,7 @@ properties:
 
   microchip,rx-int-gpios:
     description:
-      GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
+      GPIO phandle of GPIO connected to INT1 pin of the MCP251XFD, which
       signals a pending RX interrupt.
     maxItems: 1
 

Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml

@@ -16,6 +16,7 @@ properties:
   compatible:
     oneOf:
       - const: brcm,bcm5325
+      - const: brcm,bcm53101
       - const: brcm,bcm53115
       - const: brcm,bcm53125
       - const: brcm,bcm53128
@@ -77,6 +78,7 @@ allOf:
           contains:
             enum:
               - brcm,bcm5325
+              - brcm,bcm53101
               - brcm,bcm53115
               - brcm,bcm53125
               - brcm,bcm53128

Documentation/devicetree/bindings/net/ethernet-phy.yaml

@@ -232,6 +232,12 @@ properties:
       PHY's that have configurable TX internal delays. If this property is
       present then the PHY applies the TX delay.
 
+  tx-amplitude-100base-tx-percent:
+    description:
+      Transmit amplitude gain applied for 100BASE-TX. 100% matches 2V
+      peak-to-peak specified in ANSI X3.263. When omitted, the PHYs default
+      will be left as is.
+
   leds:
     type: object
 

Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml

@@ -44,6 +44,9 @@ properties:
   phy-mode:
     enum:
       - rgmii
+      - rgmii-id
+      - rgmii-rxid
+      - rgmii-txid
       - rmii
 
   phy-handle: true