A tiny ortho board that is pretending to be a fullsize.
I have not ordered any pcbs yet so consider these files under development until i can order some to test if they work.
%2F%3B&$$hashKey=0BG%3B&radii=10px&switchMount=cherry&switchBrand=gateron&switchType=KS-3-Yellow&pcb:false&plate:true%3B&@_c=%23ffffff&p=DSA&f:4%3B&=Tab&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&=Back%20Space&=Delete&_x:0.5%3B&=1&=2&=3%3B&@_c=%23c7c7c7%3B&=Esc&_c=%23ffffff%3B&=A&=S&=D&_n:true%3B&=F&=G&=H&_n:true%3B&=J&=K&=L&=%2F%3B&='&=Return&_x:0.5%3B&=4&=5&=6%3B&@=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Shift&_x:1.5%3B&=7&=8&=9%3B&@_y:-0.75&x:12.25&t=%23ffffff%3B&=%2F&uarr%2F%3B%3B&@_y:-0.25&t=%23000000&w:1.25%3B&=Ctrl&_w:1.25%3B&=Alt&_w:1.25%3B&=Super&_t=%23ffffff&w:1.25%3B&=%2F&dArr%2F%3B&_t=%23000000&a:7&w:2%3B&=&_t=%23ffffff&a:4&w:1.25%3B&=%2F&uArr%2F%3B&_t=%23000000&w:1.25%3B&=Alt&_w:1.25%3B&=Fn&_x:3.75%3B&=0&=Enter%3B&@_y:-0.75&x:11.25&t=%23ffffff%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&rarr%2F){kind=link}
These may be helpful for future in the design of a case
- builder.swillkb for the case
- ai03 plate generator
this was in part inspired by This reddit post.
- define outer geometry
- per key rgb
- route rows and columns
- switch to rp2040 based design (no dev board)
- make plate cutout file (remember to add a 2u plate mount stabiliser)
- design a case (acrlic laser cut or possible 3d printed)
- order pcbs to test
- firmware
- take it from there
- upload gerbers
- upload bom and pos files
- confirm placements
- order missing parts elsewhere (F1 and the sockets)