galp5 board config: merge needed changed to pack tpm2 toolstack, unif…

…y config as comments based on qemu-coreboot-fbwhiptail-tpm2-hotp

Signed-off-by: Thierry Laurion <[email protected]>

boards/galp5/galp5.config

@@ -6,6 +6,29 @@ export CONFIG_COREBOOT=y
 export CONFIG_COREBOOT_VERSION=system76
 export CONFIG_LINUX_VERSION=6.1.8
 
+#Enable only one RESTRICTED/BASIC boot modes below to test them manually (we cannot inject config under QEMU (no internal flashing)
+#export CONFIG_RESTRICTED_BOOT=y
+#export CONFIG_BASIC=y
+
+#Enable HAVE_GPG_KEY_BACKUP to test GPG key backup drive (we cannot inject config under QEMU (no internal flashing))
+#export CONFIG_HAVE_GPG_KEY_BACKUP=y
+
+#Enable DEBUG output
+#export CONFIG_DEBUG_OUTPUT=y
+#export CONFIG_ENABLE_FUNCTION_TRACING_OUTPUT=y
+#Enable TPM2 pcap output under /tmp
+#export CONFIG_TPM2_CAPTURE_PCAP=y
+
+#On-demand hardware support (modules.cpio)
+CONFIG_LINUX_USB=y
+CONFIG_LINUX_E1000=y
+CONFIG_MOBILE_TETHERING=y
+#Runtime on-demand additional hardware support (modules.cpio)
+export CONFIG_LINUX_USB_COMPANION_CONTROLLER=y
+
+
+
+#Modules packed into tools.cpio
 CONFIG_CRYPTSETUP2=y
 CONFIG_FLASHROM=y
 CONFIG_FLASHTOOLS=y
@@ -15,21 +38,44 @@ CONFIG_UTIL_LINUX=y
 CONFIG_LVM2=y
 CONFIG_MBEDTLS=y
 CONFIG_PCIUTILS=y
+#Runtime tools to write to MSR
+CONFIG_MSRTOOLS=y
+#Remote attestation support
+# TPM2 requirements
+CONFIG_TPM2_TSS=y
+CONFIG_OPENSSL=y
+#Remote Attestation common tools
 CONFIG_POPT=y
 CONFIG_QRENCODE=y
 CONFIG_TPMTOTP=y
-
+#HOTP based remote attestation for supported USB Security dongle
+#With/Without TPM support
+CONFIG_HOTPKEY=y
+#Nitrokey Storage admin tool (deprecated)
+#CONFIG_NKSTORECLI=n
+#GUI Support
+#Console based Whiptail support(Console based, no FB):
+#CONFIG_SLANG=y
+#CONFIG_NEWT=y
+#FBWhiptail based (Graphical):
 CONFIG_CAIRO=y
 CONFIG_FBWHIPTAIL=y
-CONFIG_HOTPKEY=y
+#Additional tools (tools.cpio):
+#SSH server (requires ethernet drivers, eg: CONFIG_LINUX_E1000E)
+#CONFIG_DROPBEAR=y
 
-CONFIG_LINUX_USB=y
-CONFIG_MOBILE_TETHERING=y
-
-export CONFIG_TPM=y
-export CONFIG_SUPPORT_USB_KEYBOARD=y
 
+#Runtime configuration
+#Automatically boot if HOTP is valid
+export CONFIG_AUTO_BOOT_TIMEOUT=5
+#TPM2 requirements
+export CONFIG_TPM2_TOOLS=y
+export CONFIG_PRIMARY_KEY_TYPE=ecc
+#TPM1 requirements
+#export CONFIG_TPM=y
 export CONFIG_BOOTSCRIPT=/bin/gui-init
+#text-based original init:
+#export CONFIG_BOOTSCRIPT=/bin/generic-init
 export CONFIG_BOOT_REQ_HASH=n
 export CONFIG_BOOT_REQ_ROLLBACK=n
 export CONFIG_BOOT_KERNEL_ADD=""