VERSION 1.2

README.md

@@ -1,4 +1,4 @@
-WinBtrfs v1.1
+WinBtrfs v1.2
 -------------
 
 WinBtrfs is a Windows driver for the next-generation Linux filesystem Btrfs.
@@ -8,23 +8,14 @@ as part of the free operating system [ReactOS](https://www.reactos.org/).
 
 First, a disclaimer:
 
-This software is in active development - YOU USE IT AT YOUR OWN RISK. I take NO
-RESPONSIBILITY for any damage it may do to your filesystem. DO NOT USE THIS
-DRIVER UNLESS YOU HAVE FULL AND UP-TO-DATE BACKUPS OF ALL YOUR DATA. Do not rely
-on Btrfs' internal mechanisms: SNAPSHOTS ARE NOT BACKUPS, AND DO NOT RULE OUT
-THE POSSIBILITY OF SILENT CORRUPTION.
-
-In other words, assume that the driver is going to corrupt your entire
-filesystem, and you'll be pleasantly surprised when it doesn't.
-
-However, having said that, it ought to be suitable for day-to-day use.
+You use this software at your own risk. I take no responsibility for any damage
+it may do to your filesystem. It ought to be suitable for day-to-day use, but
+make sure you take backups anyway.
 
 Everything here is released under the GNU Lesser General Public Licence (LGPL);
 see the file LICENCE for more info. You are encouraged to play about with the
 source code as you will, and I'd appreciate a note ([email protected]) if you
-come up with anything nifty. On top of that, I'm open to relicensing the code if
-you've a burning desire to use it on a GPL or commercial project, or what have
-you - drop me a line and we'll talk.
+come up with anything nifty.
 
 See at the end of this document for copyright details of third-party code that's
 included here.
@@ -196,12 +187,11 @@ looking into converting your files.
 This is something Microsoft hardcoded into LXSS, presumably to stop people hosing
 their systems by running `mkdir /mnt/c/WiNdOwS`.
 
-* Disk Management doesn't work properly, e.g. unable to change drive letter
+* How do I change the drive letter?
 
-Try changing the type of your partition in Linux. For MBR partitions, this should be
-type 7 in `fdisk`. For GPT partitions, this should be type 6 in `fdisk` ("Microsoft
-basic data"), or 0700 in `gdisk`. We have to do some chicanery to get Linux partitions
-to appear in the first place, but unfortunately this confuses diskmgmt.msc too much.
+With the shell extension installed, right-click the drive in Explorer, click Properties,
+and go to the Btrfs tab. There should be a button which allows you to change the drive
+letter.
 
 * How do I format a partition as Btrfs?
 
@@ -222,6 +212,14 @@ for Windows, you're out of luck.
 Changelog
 ---------
 
+v1.2 (2019-05-05):
+* Dramatic speed increase when opening many small files, such as with a Git repository
+* Fixed crash on surprise removals of removable devices
+* Added ability to change drive letters easily
+* No longer creates free-space cache for very small chunks, so as not to confuse the Linux driver
+* Fixed corruption when very large file created and then immediately deleted
+* Minor bug fixes
+
 v1.1 (2018-12-15):
 * Support for Zstd compression
 * Passthrough of Linux metadata to LXSS

src/btrfs.inf

@@ -2,15 +2,15 @@
 ;;; WinBtrfs
 ;;;
 ;;;
-;;; Copyright (c) 2016-18 Mark Harmstone
+;;; Copyright (c) 2016-19 Mark Harmstone
 ;;;
 
 [Version]
 Signature   = "$Windows NT$"
 Class       = Volume
 ClassGuid   = {71a27cdd-812a-11d0-bec7-08002be2092f}
 Provider    = %Me%
-DriverVer   = 12/15/2018,1.1.0.0
+DriverVer   = 05/04/2019,1.2.0.0
 CatalogFile = btrfs.cat
 
 [DestinationDirs]

src/btrfs.rc

@@ -13,32 +13,30 @@
 #undef APSTUDIO_READONLY_SYMBOLS
 
 /////////////////////////////////////////////////////////////////////////////
-// English (U.K.) resources
+// English (United Kingdom) resources
 
 #if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENG)
-#ifdef _WIN32
 LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_UK
 #pragma code_page(1252)
-#endif //_WIN32
 
 #ifdef APSTUDIO_INVOKED
 /////////////////////////////////////////////////////////////////////////////
 //
 // TEXTINCLUDE
 //
 
-1 TEXTINCLUDE
+1 TEXTINCLUDE 
 BEGIN
     "resource.h\0"
 END
 
-2 TEXTINCLUDE
+2 TEXTINCLUDE 
 BEGIN
     "#include ""winres.h""\r\n"
     "\0"
 END
 
-3 TEXTINCLUDE
+3 TEXTINCLUDE 
 BEGIN
     "\r\n"
     "\0"
@@ -53,8 +51,8 @@ END
 //
 
 VS_VERSION_INFO VERSIONINFO
- FILEVERSION 1,1,0,0
- PRODUCTVERSION 1,1,0,0
+ FILEVERSION 1,2,0,0
+ PRODUCTVERSION 1,2,0,0
  FILEFLAGSMASK 0x17L
 #ifdef _DEBUG
  FILEFLAGS 0x1L
@@ -70,12 +68,12 @@ BEGIN
         BLOCK "080904b0"
         BEGIN
             VALUE "FileDescription", "WinBtrfs"
-            VALUE "FileVersion", "1.1"
+            VALUE "FileVersion", "1.2"
             VALUE "InternalName", "btrfs"
-            VALUE "LegalCopyright", "Copyright (c) Mark Harmstone 2016-18"
+            VALUE "LegalCopyright", "Copyright (c) Mark Harmstone 2016-19"
             VALUE "OriginalFilename", "btrfs.sys"
             VALUE "ProductName", "WinBtrfs"
-            VALUE "ProductVersion", "1.1"
+            VALUE "ProductVersion", "1.2"
         END
     END
     BLOCK "VarFileInfo"
@@ -84,7 +82,7 @@ BEGIN
     END
 END
 
-#endif    // English (U.K.) resources
+#endif    // English (United Kingdom) resources
 /////////////////////////////////////////////////////////////////////////////
 
 

src/mkbtrfs/mkbtrfs.rc

@@ -25,18 +25,18 @@ LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_UK
 // TEXTINCLUDE
 //
 
-1 TEXTINCLUDE
+1 TEXTINCLUDE 
 BEGIN
     "resource.h\0"
 END
 
-2 TEXTINCLUDE
+2 TEXTINCLUDE 
 BEGIN
     "#include ""winres.h""\r\n"
     "\0"
 END
 
-3 TEXTINCLUDE
+3 TEXTINCLUDE 
 BEGIN
     "\r\n"
     "\0"
@@ -51,8 +51,8 @@ END
 //
 
 VS_VERSION_INFO VERSIONINFO
- FILEVERSION 1,1,0,0
- PRODUCTVERSION 1,1,0,0
+ FILEVERSION 1,2,0,0
+ PRODUCTVERSION 1,2,0,0
  FILEFLAGSMASK 0x17L
 #ifdef _DEBUG
  FILEFLAGS 0x1L
@@ -68,12 +68,12 @@ BEGIN
         BLOCK "080904b0"
         BEGIN
             VALUE "FileDescription", "Btrfs formatting utility"
-            VALUE "FileVersion", "1.1"
+            VALUE "FileVersion", "1.2"
             VALUE "InternalName", "mkbtrfs"
-            VALUE "LegalCopyright", "Copyright (c) Mark Harmstone 2016-18"
+            VALUE "LegalCopyright", "Copyright (c) Mark Harmstone 2016-19"
             VALUE "OriginalFilename", "mkbtrfs.exe"
             VALUE "ProductName", "WinBtrfs"
-            VALUE "ProductVersion", "1.1"
+            VALUE "ProductVersion", "1.2"
         END
     END
     BLOCK "VarFileInfo"
@@ -106,7 +106,7 @@ END
 STRINGTABLE
 BEGIN
     IDS_NO_NODE_SIZE        "No node size specified."
-    IDS_CANT_FIND_SETINCOMPATFLAGS
+    IDS_CANT_FIND_SETINCOMPATFLAGS 
                             "Could not load function SetIncompatFlags in %s"
     IDS_USAGE2              "The device parameter can either be a drive letter, e.g. D:, or a device path,\nsuch as \\Device\\Harddisk0\\Partition2.\n\nTo format the whole of the first hard disk without using partitions, you would\nneed to use the parameter \\Device\\Harddisk0\\Partition0.\n\nSupported flags:\n\n/sectorsize:num                     Sets the sector size. This must be a\n                                    multiple of the size that the disk itself\n                                    reports. The default is 4096, which should\n                                    be used unless you have a good reason.\n\n/nodesize:num                       Sets the node size, i.e. the size of the\n                                    metadata trees. The default is 16384. This\n                                    needs to either be the same as sector size,\n                                    or a power of two multiple.\n\n/mixed                              Enables or disable mixed block groups,\n/notmixed                           which store data and and metadata in the\n                                    same chunks. The default is disabled. This\n                                    is only useful for very small filesystems.\n\n/extiref                            Enables or disables extened inode refs,\n/notextiref                         which increase the number of hardlinks\n                                    allowed. The default is enabled.\n\n/skinnymetadata                     Enables or disable skinny metadata, which\n/notskinnymetadata                  allows more efficient storage of metadata\n                                    refs. The default is enabled.\n\n/noholes                            Enables or disables whether sparse extents\n/notnoholes                         should be stored implicitly, which can save\n                                    a little space. The default is disabled."
 END

src/mkbtrfs/resource.h

@@ -1,4 +1,4 @@
-//{{NO_DEPENDENCIES}}
+//{{NO_DEPENDENCIES}}
 // Microsoft Visual C++ generated include file.
 // Used by mkbtrfs.rc
 //

src/resource.h

@@ -1,6 +1,7 @@
-//{{NO_DEPENDENCIES}}
+//{{NO_DEPENDENCIES}}
 // Microsoft Visual C++ generated include file.
 // Used by btrfs.rc
+//
 
 // Next default values for new objects
 // 

src/shellext/shellbtrfs.rc

@@ -61,8 +61,8 @@ IDI_ICON1               ICON                    "subvol.ico"
 //
 
 VS_VERSION_INFO VERSIONINFO
- FILEVERSION 1,1,0,0
- PRODUCTVERSION 1,1,0,0
+ FILEVERSION 1,2,0,0
+ PRODUCTVERSION 1,2,0,0
  FILEFLAGSMASK 0x17L
 #ifdef _DEBUG
  FILEFLAGS 0x1L
@@ -78,12 +78,12 @@ BEGIN
         BLOCK "080904b0"
         BEGIN
             VALUE "FileDescription", "WinBtrfs shell extension"
-            VALUE "FileVersion", "1.1"
+            VALUE "FileVersion", "1.2"
             VALUE "InternalName", "btrfs"
-            VALUE "LegalCopyright", "Copyright (c) Mark Harmstone 2016-18"
+            VALUE "LegalCopyright", "Copyright (c) Mark Harmstone 2016-19"
             VALUE "OriginalFilename", "shellbtrfs.dll"
             VALUE "ProductName", "WinBtrfs"
-            VALUE "ProductVersion", "1.1"
+            VALUE "ProductVersion", "1.2"
         END
     END
     BLOCK "VarFileInfo"

src/ubtrfs/resource.h

@@ -1,6 +1,7 @@
-//{{NO_DEPENDENCIES}}
+//{{NO_DEPENDENCIES}}
 // Microsoft Visual C++ generated include file.
 // Used by ubtrfs.rc
+//
 
 // Next default values for new objects
 // 

src/ubtrfs/ubtrfs.rc

@@ -25,18 +25,18 @@ LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_UK
 // TEXTINCLUDE
 //
 
-1 TEXTINCLUDE
+1 TEXTINCLUDE 
 BEGIN
     "resource.h\0"
 END
 
-2 TEXTINCLUDE
+2 TEXTINCLUDE 
 BEGIN
     "#include ""winres.h""\r\n"
     "\0"
 END
 
-3 TEXTINCLUDE
+3 TEXTINCLUDE 
 BEGIN
     "\r\n"
     "\0"
@@ -51,8 +51,8 @@ END
 //
 
 VS_VERSION_INFO VERSIONINFO
- FILEVERSION 1,1,0,0
- PRODUCTVERSION 1,1,0,0
+ FILEVERSION 1,2,0,0
+ PRODUCTVERSION 1,2,0,0
  FILEFLAGSMASK 0x17L
 #ifdef _DEBUG
  FILEFLAGS 0x1L
@@ -68,12 +68,12 @@ BEGIN
         BLOCK "080904b0"
         BEGIN
             VALUE "FileDescription", "Btrfs utility DLL"
-            VALUE "FileVersion", "1.1"
+            VALUE "FileVersion", "1.2"
             VALUE "InternalName", "ubtrfs"
-            VALUE "LegalCopyright", "Copyright (c) Mark Harmstone 2016-18"
+            VALUE "LegalCopyright", "Copyright (c) Mark Harmstone 2016-19"
             VALUE "OriginalFilename", "ubtrfs.dll"
             VALUE "ProductName", "WinBtrfs"
-            VALUE "ProductVersion", "1.1"
+            VALUE "ProductVersion", "1.2"
         END
     END
     BLOCK "VarFileInfo"