nix-community/hpe-ltfs
Folders and files
| Name | Name | Last commit date | ||
|---|---|---|---|---|
 |  | |||
 |  | |||
 |  | |||
 |  | |||
 |  | |||
Repository files navigation
======================================================================= HPE StoreOpen Software (HPE-SOS) - Version 3.4.2 ======================================================================= Files in this download contain Licensed Materials, property of HPE, (C) Copyright 2015-2018 Hewlett Packard Enterprise Development LP Files in this download also contain Licensed Materials, property of IBM, (C) Copyright IBM Corp. 2010, 2014 The HPE LTFS software application is an open-source tape file system implemented on dual partition tape drives. This file is part of the HPE Linear Tape File System package. HPE LTFS is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, version 2.1 of the License. HPE LTFS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA or download the license from <http://www.gnu.org/licenses/>. See the Licensing agreement (COPYING.LIB) when LTFS is downloaded. Further details on HPE's LTFS implementation can be found at www.hpe.com/storage/storeopen ======================================================================= HPE-SOS usage ======================================================================= 1. Build and/or install the HPE-SOS application Installation instuctions are in INSTALLING.linux / INSTALLING.macosx Information on how to build from source are in BUILDING.linux / BUILDING.macosx / Building.windows 2. Ensure that /usr/local/bin/ is in your command search path For example: $ export PATH="$PATH:/usr/local/bin" 3. Format the tape cartridge in LTFS format For Linux: $ mkltfs -d /dev/st0 For Mac OS X: $ mkltfs -d 0 Usage: mkltfs <options> Available options are: -d, --device=<name> Tape device (required) -f, --force Force to format medium -s, --tape-serial=<id> Tape serial number (6 alphanumeric ASCII characters) -n, --volume-name=<name> Tape volume name (LTFS VOLUME by default) -r, --rules=<rules> Rules for choosing files to write to the index partition. The syntax of the rule argument is: size=1M size=1M/name=pattern size=1M/name=pattern1:pattern2:pattern3 A file is written to the index partition if it is no larger than the given size AND matches at least one of the name patterns (if specified). The size argument accepts K, M, and G suffixes. Name patterns might contain the special characters '?' (match any single character) and '*' (match zero or more characters). --no-override Disallow mount-time data placement policy changes -w, --wipe Restore the LTFS medium to an unpartitioned medium (format to a legacy scratch medium) -q, --quiet Suppress progress information and general messages -t, --trace Enable function call tracing --syslogtrace Enable diagnostic output to stderr and syslog -V, --version Version information -h, --help This help -p, --advanced-help Full help, including advanced options -g, --interactive Interactive mode -i, --config=<file> Use the specified configuration file (default: /usr/local/etc/ltfs.conf) -e, --backend=<name> Use the specified tape device backend (default: ltotape) -b, --blocksize=<num> Set the LTFS record size (default: 524288) -c, --no-compression Disable compression on the volume -k, --keep-capacity Keep the tape medium's total capacity proportion -x, --fulltrace Enable full function call tracing (slow) --long-wipe Unformat the medium and erase any data on the tape by overwriting with special data pattern. This operation takes over 3 hours. Once you start, you cannot interrupt it. LTFS17085I Plugin: Loading "ltotape" driver LTOTAPE backend options: -o log_directory=<dir> log snapshot directory (default=/var/log) -o nosizelimit remove 512kB limit (NOT RECOMMENDED) Usage example: mkltfs --device=/dev/nst0 --rules="size=100K" mkltfs --device=/dev/nst0 --rules="size=1M/name=*.jpg" mkltfs --device=/dev/nst0 --rules="size=1M/name=*.jpg:*.png" 4. Mount the formatted tape cartridge $ mkdir /mnt/lto5 $ ltfs /mnt/lto5 ltfs options: usage: ltfs mountpoint [options] general options: -o opt,[opt...] mount options -h --help print help -V --version print version FUSE options: -d -o debug enable debug output (implies -f) -f foreground operation -s disable multi-threaded operation -o allow_other allow access to other users -o allow_root allow access to root -o nonempty allow mounts over non-empty file/dir -o default_permissions enable permission checking by kernel -o fsname=NAME set filesystem name -o subtype=NAME set filesystem type -o large_read issue large read requests (2.4 only) -o max_read=N set maximum size of read requests -o hard_remove immediate removal (don't hide files) -o use_ino let filesystem set inode numbers -o readdir_ino try to fill in d_ino in readdir -o direct_io use direct I/O -o kernel_cache cache files in kernel -o [no]auto_cache enable caching based on modification times (off) -o umask=M set file permissions (octal) -o uid=N set file owner -o gid=N set file group -o entry_timeout=T cache timeout for names (1.0s) -o negative_timeout=T cache timeout for deleted names (0.0s) -o attr_timeout=T cache timeout for attributes (1.0s) -o ac_attr_timeout=T auto cache timeout for attributes (attr_timeout) -o intr allow requests to be interrupted -o intr_signal=NUM signal to send on interrupt (10) -o modules=M1[:M2...] names of modules to push onto filesystem stack -o max_write=N set maximum size of write requests -o max_readahead=N set maximum readahead -o async_read perform reads asynchronously (default) -o sync_read perform reads synchronously -o atomic_o_trunc enable atomic open+truncate support -o big_writes enable larger than 4kB writes -o no_remote_lock disable remote file locking Module options: [subdir] -o subdir=DIR prepend this directory to all paths (mandatory) -o [no]rellinks transform absolute symlinks to relative [iconv] -o from_code=CHARSET original encoding of file names (default: UTF-8) -o to_code=CHARSET new encoding of the file names (default: UTF-8) LTFS options: -o config_file=<file> Configuration file (default: /usr/local/etc/ltfs.conf) -o work_directory=<dir> LTFS work directory (default: /tmp/ltfs) -o atime Update index if only access times have changed -o noatime Do not update index if only access times have changed (default) -o tape_backend=<name> tape backend to use (default: ltotape) -o iosched_backend=<name> I/O scheduler implementation to use (default: unified, use "none" to disable) -o umask=<mode> Override default permission mask (3 octal digits, default: 000) -o fmask=<mode> Override file permission mask (3 octal digits, default: 000) -o dmask=<mode> Override directory permission mask (3 octal digits, default: 000) -o min_pool_size=<num> Minimum write cache pool size. Cache objects are 1 MB each (default: 25) -o max_pool_size=<num> Maximum write cache pool size. Cache objects are 1 MB each (default: 50) -o rules=<rules> Rules for choosing files to write to the index partition. The syntax of the rule argument is: size=1M size=1M/name=pattern size=1M/name=pattern1:pattern2:pattern3 A file is written to the index partition if it is no larger than the given size AND matches at least one of the name patterns (if specified). The size argument accepts K, M, and G suffixes. Name patterns might contain the special characters '?' (match any single character) and '*' (match zero or more characters). -o quiet Disable informational messages (same as verbose=1) -o trace Enable diagnostic output (same as verbose=3) -o syslogtrace Enable diagnostic output to stderr and syslog (same as verbose=303) -o fulltrace Enable full call tracing (same as verbose=4) -o verbose=<num> Override output verbosity directly (default:2) -o eject Eject the cartridge after unmount -o noeject Do not eject the cartridge after unmount (default) -o sync_type=<type> Specify sync type (default: time@5) <type> should be specified as follows: time@min: LTFS attempts to write an index every 'min' minutes. min should be a decimal value from 1 to 10. A value of 0 is equivalent to "-o sync_type=unmount" (default: min=5) close: LTFS attempts to write an index when each file is closed. This is not recommended for normal use. unmount: LTFS attempts to write an index only when the medium is unmounted -o force_mount_no_eod Skip EOD existence check when mounting (read-only mount) Only use for a CM corrupted medium -o rollback_mount=<gen> Attempt to mount on previous index generation (read-only mount) -o release_device Clear device reservation (should be specified with -o devname -o capture_index Capture latest index to the work directory at unmount -a Advanced help, including standard FUSE options 453e LTFS17085I Plugin: Loading "ltotape" driver LTOTAPE backend options: -o devname=<dev> tape device (default=/dev/nst0) -o log_directory=<dir> log snapshot directory (default=/var/log) -o nosizelimit remove 512kB limit (NOT RECOMMENDED) 5. Write files to the LTFS volume For example: $ cp -RL /home/user1 /mnt/lto5/ 6. Unmount the tape cartridge This flushes the data buffer of the file system to the tape cartridge, and prepares for eject. $ umount /mnt/lto5 OR $ fusermount -u /mnt/lto5 (Linux only) 7. If at some time in the future user wishes to remove the LTFS format from the cartridge so that it can be reused for a different purpose, use the unltfs utility. Note that this will IRRETRIEVABLY DESTROY all contents of the cartridge, so use it only when you are sure that you wish to erase the LTFS volume. $ unltfs -d /dev/st0 unltfs options: Usage: unltfs <options> -d, --device=<name> specifies the tape drive to use -y, --justdoit omits normal verification steps, reformats without further prompting -e --eject eject tape after operation completes successfully -q, --quiet suppresses all progress output -t, --trace displays detailed progress -h, --help shows this help -i, --config=<file> overrides the default config file -b, --backend specifies a different tape backend subsystem -x, --fulltrace displays debug information (verbose) 8. If the cartridge becomes inconsistent due to power failure, improper unmount, or other exceptional conditions then the ltfsck utility can be used to repair it / make it consistent again. $ ltfsck /dev/st0 ltfsck options Usage: ltfsck [options] filesys filesys Device file for the tape drive Available options are: -g, --generation=<generation> Specify the generation to roll back -r, --rollback Roll back to the point specified by -g -n, --no-rollback Do not roll back. Verify the point specified by -g (default) -f, --full-recovery Recover extra data blocks into directory _ltfs_lostandfound -z, --deep-recovery Recover a cartridge with missing EOD Some blocks might be erased, but recover to final unmount point with an index version of at least 2.0.0 or earlier. This option must be used for a cartridge that cannot be recovered by a normal repair) -l, --list-rollback-points List rollback points -m, --full-index-info Display full index information (works only with the -l option) -v, --traverse=<strategy> Set traverse mode for listing roll back points. Strategy should be forward or backward. (default: backward) -j, --erase-history Erase history at rollback -k, --keep-history Keep history at rollback (default) -q, --quiet Suppress informational messages -t, --trace Enable diagnostic output --syslogtrace Enable diagnostic output to stderr and syslog -V, --version Version information -h, --help This help -p, --advanced-help Full help, including advanced options -i, --config=<file> Use the specified configuration file (default: /usr/local/etc/ltfs.conf) -e, --backend=<name> Override the default tape device backend -x, --fulltrace Enable full function call tracing (slow) --capture-index Capture index information to the current directory (-g is effective for this option) --salvage-rollback-points List the rollback points of a cartridge that has no EOD LTFS17085I Plugin: Loading "ltotape" driver LTOTAPE backend options: -o log_directory=<dir> log snapshot directory (default=/var/log) -o nosizelimit remove 512kB limit (NOT RECOMMENDED) Usage example: ltfsck /dev/nst0 ltfsck --generation --rollback /dev/nst0 ltfsck --deep-recovery --full-recovery /dev/nst0 Changes from version v3.4.1 to 3.4.2: ===================================== - Corrected issue switching in/out of append-only mode with LTO7/LTO8 drives - Corrected issue with ltfscopy and md5sum verification Changes from version v3.4.0 to 3.4.1: ===================================== - Corrected issue affecting sending of library drive tickets to CVTL - Corrected issue with truncation of barcodes Changes from version v3.3.0 to 3.4.0: ===================================== - Support append-only mode option flag for LTO7 & LTO8 drives - Defect fixes Changes from version v3.2.0 to 3.3.0: ===================================== - Support for HPE LTO8 tape drives - Support for SNIA 2.4 Percent Encoding - Support for SNIA 2.4 Vol Avisory Locking - Support for SNIA 2.4 Open for Write - Defect fixes Changes from version v3.1.0 to 3.2.0: ===================================== - Support for Volume Advisory Locking - Support for volume UUID - Support for Windows Server 2016 - Support for macOS Sierra - Support for capturing index by default (Windows and Mac Only) - LTFSCOPY default behavior changed to prompt before overwriting files - LTFSCOPY will preserve modification time with new option '-t' - Added support for HPE Archive Manager tape identification and mounting the same as read only - Defect fixes Changes from version v3.0.0 to 3.1.0: ===================================== - Hewlett Packard Enterprise Branding Changes from version v2.3.0 to 3.0.0: ===================================== - Support for HP LTO-7 Ultrium SAS standalone tape drives - LTFS Configurator displays messages indicating the progress of the mount operation - LTFS Configurator supports custom names for tape drives - CartridgeBrowser utility supports search based on file attribute values Changes from version v2.2.1 to 2.3.0: ===================================== - Added multidrive support for windows - Added support for icons and label to indicate the status of the cartridge in windows - Added support for search option within Cartridge Browser - Added new utility "LTFS Smart copy" for efficient data transfer from cartridge and content data verification for files on the cartridge. - Implemented ability to list rollback points of a cartridge without EOD marker (--salvage-rollback-points) - Installation in Linux (RHEL)is now using RPM package. - LTFS is built with ICU version 50.1.2 - Added support for RHEL 7.0 - Added support for MacOSX 10.10 - Removed support for SLES - Defect fixes Changes from version v2.2.0 to 2.2.1: ===================================== - Added 'interactive mode' for mkltfs utility. - The default 'mkltfs' behavior modified to avoid user confirmation. - The '--quite' option in 'mkltfs' and 'unltfs' utilities now does not imply '--force' Changes from version v2.1.1 to 2.2.0: ===================================== - Added support for LTFS Spec Version 2.2.0 - Added support for MAM Barcode attribute - Added support for ICU version 4.8.1.1 - Added support for RHEL 6.5 and RHEL 5.10 - Added support for Windows 2012 R2 and Windows 8.1 - Removed support for MacOSX 10.6 - Defects fixed in Windows and Mac GUI - Defects fixed in Windows and Mac Installer - Defects fixed in LTFS core application Changes from version v2.1.0 to 2.1.1: ====================================== - Error fixes in windows installer to support upgrade - Fix to accept the index rules correctly when supplied using the LTFSConfigurator - Fix in ltfsck when run with --deep-recovery option - Fix to mount full tapes as read-only - Fix to clear the EWSTATE flag when a full tape is rolled back with --erase-history option - Fixed memory leaks Changes from version v2.0.0 to 2.1.0: ====================================== - Enhanced LTFS driver for small file support(Improve file creation/listing time when a directory has many small files) - Improved Wizards and Configuration tool for Windows GUI - Cartridge utilities can be run directly from LTFSconfigurator - Default volume name is LTFS_VOLUME - Enhanced support for LTO CM attributes - Added support LTFS format specifications 2.1.0 - Added support for symbolic link for Linux and Mac - Added support for rollback mount/read-only mount - Added support to save the current index as a xml file on unmount or when 'ltfsck' is run. - Application can run in background now in Mac. - Rollback of index is now possible only by specifying the generation number of the index, rollback using timespec of the index is disabled. - Implemented signal handlers to handle kill/interrupt signals and unmount the volume even when the mount is being done. - Tape can be unformatted by specifying -w option to mkltfs Changes from version v1.2.2 to v2.0.0: ====================================== - Added support for LTO6 tape drives - Set the Application Format Version MAM attribute when formatting a volume - Added support for four new virtual extended attributes (VEA's): ltfs.softwareProduct, ltfs.softwareVendor, ltfs.softwareVersion, ltfs.softwareFormatSpec - Improved the handling of a cartridge that was not unmounted properly - Improved the process for storing a file on the index partition when the data placement policy is specified - Modified to update the change time of a file or directory when the VEA ltfs.modifyTime is written - Fixed the problem that ltfs.mediaStorageAlert VEA is cleared when another VEA is read - Fixed a problem in ltfsck when trying to list rollback points and a corrupt index is encountered - Added a check for a write-protected cartridge in mkltfs Changes from version v1.2.0 to v1.2.2: ====================================== - Added the unltfs utility - Added "-o nosizelimit" option to ltfs - Improved message reporting for advisory conditions that previously were being reported as error conditions - Installer on Mac OS X now tries to create the logfile directory if it doesn't already exist - Mac OS X package now includes an application to simplify the management of an LTFS volume Changes from version v1.1.0 to v1.2.0: ====================================== - Conforms with new LTFS Format Specification 2.0.0 - Backward compatibility with Version 1.0 formated tapes, and built-in automatic migration mechanism to Version 2.0.0 format - Improved the parsing and handling of the index information - Supports standardized virtual extended attribute (VEA) names. VEA names used in previous release of LTFS become obsolete and no longer available. - See Important Note below - Enhanced the ability to recover the tapes in inconsistent state, which was caused by unexpected power outage. - Added a new function to flush the in-memory user data to the tape medium at pre-defined timing; either sync at file close or sync periodically. The default behaviour is now to sync the index every five minutes. - Changed the command line syntax of ltfs and mkltfs command for specifying the data placement rules - Check for incompatible media and report problems in a helpful way - Various minor corrections and updates Important Note: =============== Earlier versions of the HPE LTFS application supported the original 1.0 LTFS format specification; version v1.2.0 and later supports the updated 2.0.0 LTFS format specification. LTFS volumes created with application v1.2.0 will not be readable in older versions of the LTFS application, as shown in the following table: Cartridge written by Cartridge written by Cartridge written by LTFS application v1.1.0 or earlier v1.2.0 or later v2.1.0 or later -------------------- ---------------------- ---------------------- ----------------------- v1.1.0 or earlier Read/Write ok Cannot be mounted N/A v1.2.0 or later Readable ok; will Read/Write ok N/A automatically be converted to new format if written v2.1.0 or later Readable ok; will Readable ok; will Read/Write ok automatically be automatically be converted to new converted to new format if written format if written HPE recommends that all instances of HPE LTFS should be updated to latest version to avoid these compatibility issues. If for some reason it is important to maintain cartridges readable by previous versions of the HPE LTFS application, care should be taken to avoid writing to those cartridges with the new version of the application. This may be accomplished by mounting the volume as read-only, or by using the cartridge write-protect tab to prevent cartridge updates. However this should be regarded as a temporary measure until all the application instances can be updated to latest version. Limitations: ============ 1. When the tape cartridge is almost full, further write operations will be prevented. The free space on the tape (e.g. from the df command) will indicate that there is still some capacity available, but that is reserved for updating the index when the tape is unmounted. 2. Future mounts of a cartridge that is almost full (has passed the point at which "early warning" is reported) will mount as Read Only, to prevent further modifications which may not fit on tape. This status is cleared when a cartridge is reformatted (using mkltfs) or when the volume is rolled back erasing history (using ltfsck). 3. (Mac OS X) LTFS does not support moving a folder within LTFS. Any attempt to move a folder in such a manner will result in an "operation not permitted" error, and the operation will be ignored. The user can still move a file within LTFS, and the user can also move a folder from LTFS to non-LTFS file system or vice versa. 4. (Mac OS X) Mac OS X's Spotlight will not display the files on LTFS as a result of search.
