Skip to content

Protocol 2: sync with ANAN 100D 12.1.8

Latest
Latest
Compare
Choose a tag to compare
@ra1nb0w ra1nb0w released this 02 Feb 10:12
1.3
e185d39
This commit was signed with the committer’s verified signature. The key has expired.
ra1nb0w ra1nb0w
GPG key ID: 7CBEFA144857DC97
Expired
Verified
Learn about vigilant mode.

Protocol 2 radio gateware:

  • sync the radio gateware with the latest upstream Anan 100D code (12.1.8)
  • added support for the OpenHPSDR 3.8 and 3.9 protocols (except for the auto-negotiation of 100M/1000M)
  • remote reboot when in radio mode (using programmer -q you can reset the radio and enter into the bootloader)
  • better DACD and pure-signal performance
  • fix Wideband
  • fix DHCP issue during running
  • substituted a few for cycle with static declaration (NR is always 4)
  • cleanup and removed unused files
  • added comments about Odyssey2 clock distribution

PCB:

  • did many tests to stabilize the RF power output (check schematics)
  • added few datasheets

NOTE: You don't need to update the mcu firmware and the bootloader to use these gateware.
For documentation read the README.org in the various folder.

Files:

  • mcu-3.0.hex: firmware to flash into the MCU
  • programmer-0.2.0.exe: use in windows to interact with the bootloader
  • bootloader-3.0.pof: FPGA bootloader to load through JTAG
  • odyssey2-6.01_P1.rbf: gateware with protocol 1 (100MBit/s only)
  • odyssey2-12.1.8_P2.rbf: gateware with protocol 2 (1000MBit/s only)
Assets 7
Loading