Update readme usb_preloaded_firmware and BLE midi

connectivity/ble-Midi/Readme.md

@@ -1,4 +1,4 @@
-# ble-Midi
+\# ble-Midi
 
 ![Banner](https://s3.eu-central-1.amazonaws.com/lpccs-docs.renesas.com/metadata/BLE_SDK6_examples/connectivity/ble-Midi/banner.svg?v=1)
 

helpers/usb_preloaded_firmware/Readme.md

@@ -6,11 +6,11 @@
 
 The main purpose of this software example is to provide the source files containing the firmware for the preloaded binary in the DA1453x USB kit.
 - Devices naming:
-    - DA1453x is refering to DA14531-00, DA14531-01, DA14530 and DA14535.
+    - DA1453x is referring to DA14531-00, DA14531-01, DA14530 and DA14535.
     - The DA14531-00 is the main DA14531 device. The -00 is just a new naming to introduce the variant DA14531-01. The DA14531-01 is a ROM variant of the main DA14531-00.
     - The DA14535 is a DA14531 upgrade.
 
-The [UM-B-121 DA14531 getting Started with the USB Development Kit](https://lpccs-docs.renesas.com/UM-B-121-USB-Getting-Started-Guide/index.html)  and The [UM-B-183 DA14535 getting Started with the USB Development Kit](https://lpccs-docs.renesas.com/UM-B-183-DA14535-USB-Getting-Started/index.html) show how to run the demo.
+The [UM-B-121 DA14531 getting Started with the USB Development Kit](https://lpccs-docs.renesas.com/UM-B-121-USB-Getting-Started-Guide/index.html) and The [UM-B-183 DA14535 getting Started with the USB Development Kit](https://lpccs-docs.renesas.com/UM-B-183-DA14535-USB-Getting-Started/index.html) show how to run the demo.
 
 ## Hardware & Software Configuration
 
@@ -22,7 +22,7 @@ This firmware example runs on DA1453x Bluetooth Smart SoC devices.
 
 ### Hardware Configuration
 
-The DIP switch should have the following assignment as illustrated below, this allows the system to boot from external flash or 1-wire UART and communicate through JTAG for debugging
+The DIP switch should have the following assignment as illustrated below, this allows the system to boot from external flash or 1-wire UART and communicate through JTAG for debugging.
 
 ![j1_config](assets/dip_switch.png)
 
@@ -36,6 +36,10 @@ The Example can also run on ***DA145xx Pro Development Kit*** with default jumpe
 
 ![j1_config](assets/j1_config.svg)
 
+- This example works also on the DA1453x DEVKT-P with with any DA1453x Daughterboard
+	![Motherboard_Hardware_Configuration_DA14531](assets/da14535_pro_flash.svg)
+
+
 You can also refer to the following documentation:
 - For the DA14531 getting started guide you can refer to [UM-B-117](https://lpccs-docs.renesas.com/UM-B-117-DA14531-Getting-Started-With-The-Pro-Development-Kit/index.html)
 
@@ -63,8 +67,8 @@ You can also refer to the following documentation:
 
 - Apply the ``SDK6patch.diff`` patch 
 - Navigate to ``project_environment`` folder and open the ***Keil*** project.
-- Compile and then launch the demonstration example. You can download the firmware either into System-RAM or SPI Flash. To download the firmware into SPI Flash, the  SPI Flash programmer from SmartSnippets Toolbox should be used. 
-For programming the DA14531 using the compiled hex file and boot from flash, please refer to  [Chapter 13 SPI Flash Programmer in the SmartSnippets Toolbox User Manual](http://lpccs-docs.dialog-semiconductor.com/Software_Example_Setup/index.html).
+- Compile and then launch the demonstration example. You can download the firmware either into System-RAM or SPI Flash. To download the firmware into SPI Flash, the SPI Flash programmer from SmartSnippets Toolbox should be used. 
+For programming the DA14531 using the compiled hex file and boot from flash, please refer to  section 3.1 of the [UM-B-083 SmartSnippets Toolbox User Manual](https://lpccs-docs.renesas.com/UM-B-083/index.html)
 
 ## Known Limitations