Linux 3.0.18

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 0
-SUBLEVEL = 17
+SUBLEVEL = 18
 EXTRAVERSION =
 NAME = Sneaky Weasel
 

arch/ia64/kernel/acpi.c

@@ -429,22 +429,24 @@ static u32 __devinitdata pxm_flag[PXM_FLAG_LEN];
 static struct acpi_table_slit __initdata *slit_table;
 cpumask_t early_cpu_possible_map = CPU_MASK_NONE;
 
-static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
+static int __init
+get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
 {
 	int pxm;
 
 	pxm = pa->proximity_domain_lo;
-	if (ia64_platform_is("sn2"))
+	if (ia64_platform_is("sn2") || acpi_srat_revision >= 2)
 		pxm += pa->proximity_domain_hi[0] << 8;
 	return pxm;
 }
 
-static int get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma)
+static int __init
+get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma)
 {
 	int pxm;
 
 	pxm = ma->proximity_domain;
-	if (!ia64_platform_is("sn2"))
+	if (!ia64_platform_is("sn2") && acpi_srat_revision <= 1)
 		pxm &= 0xff;
 
 	return pxm;

arch/score/kernel/entry.S

@@ -408,7 +408,7 @@ ENTRY(handle_sys)
 	sw	r9, [r0, PT_EPC]
 
 	cmpi.c	r27, __NR_syscalls 	# check syscall number
-	bgtu	illegal_syscall
+	bgeu	illegal_syscall
 
 	slli	r8, r27, 2		# get syscall routine
 	la	r11, sys_call_table

arch/x86/include/asm/amd_nb.h

@@ -1,6 +1,7 @@
 #ifndef _ASM_X86_AMD_NB_H
 #define _ASM_X86_AMD_NB_H
 
+#include <linux/ioport.h>
 #include <linux/pci.h>
 
 struct amd_nb_bus_dev_range {
@@ -13,6 +14,7 @@ extern const struct pci_device_id amd_nb_misc_ids[];
 extern const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[];
 
 extern bool early_is_amd_nb(u32 value);
+extern struct resource *amd_get_mmconfig_range(struct resource *res);
 extern int amd_cache_northbridges(void);
 extern void amd_flush_garts(void);
 extern int amd_numa_init(void);

arch/x86/kernel/amd_nb.c

@@ -119,6 +119,37 @@ bool __init early_is_amd_nb(u32 device)
 	return false;
 }
 
+struct resource *amd_get_mmconfig_range(struct resource *res)
+{
+	u32 address;
+	u64 base, msr;
+	unsigned segn_busn_bits;
+
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return NULL;
+
+	/* assume all cpus from fam10h have mmconfig */
+        if (boot_cpu_data.x86 < 0x10)
+		return NULL;
+
+	address = MSR_FAM10H_MMIO_CONF_BASE;
+	rdmsrl(address, msr);
+
+	/* mmconfig is not enabled */
+	if (!(msr & FAM10H_MMIO_CONF_ENABLE))
+		return NULL;
+
+	base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
+
+	segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
+			 FAM10H_MMIO_CONF_BUSRANGE_MASK;
+
+	res->flags = IORESOURCE_MEM;
+	res->start = base;
+	res->end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
+	return res;
+}
+
 int amd_get_subcaches(int cpu)
 {
 	struct pci_dev *link = node_to_amd_nb(amd_get_nb_id(cpu))->link;

arch/x86/kernel/apic/x2apic_uv_x.c

@@ -779,7 +779,12 @@ void __init uv_system_init(void)
 	for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
 		uv_possible_blades +=
 		  hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));
-	printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
+
+	/* uv_num_possible_blades() is really the hub count */
+	printk(KERN_INFO "UV: Found %d blades, %d hubs\n",
+			is_uv1_hub() ? uv_num_possible_blades() :
+			(uv_num_possible_blades() + 1) / 2,
+			uv_num_possible_blades());
 
 	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
 	uv_blade_info = kzalloc(bytes, GFP_KERNEL);

arch/x86/mm/mmap.c

@@ -87,9 +87,9 @@ static unsigned long mmap_rnd(void)
 	*/
 	if (current->flags & PF_RANDOMIZE) {
 		if (mmap_is_ia32())
-			rnd = (long)get_random_int() % (1<<8);
+			rnd = get_random_int() % (1<<8);
 		else
-			rnd = (long)(get_random_int() % (1<<28));
+			rnd = get_random_int() % (1<<28);
 	}
 	return rnd << PAGE_SHIFT;
 }

arch/x86/mm/srat.c

@@ -104,6 +104,8 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
 		return;
 	pxm = pa->proximity_domain_lo;
+	if (acpi_srat_revision >= 2)
+		pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8;
 	node = setup_node(pxm);
 	if (node < 0) {
 		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
@@ -155,6 +157,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 	start = ma->base_address;
 	end = start + ma->length;
 	pxm = ma->proximity_domain;
+	if (acpi_srat_revision <= 1)
+		pxm &= 0xff;
 	node = setup_node(pxm);
 	if (node < 0) {
 		printk(KERN_ERR "SRAT: Too many proximity domains.\n");

arch/x86/pci/Makefile

@@ -18,8 +18,9 @@ obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_MRST)		+= mrst.o
 
 obj-y				+= common.o early.o
-obj-y				+= amd_bus.o bus_numa.o
+obj-y				+= bus_numa.o
 
+obj-$(CONFIG_AMD_NB)		+= amd_bus.o
 obj-$(CONFIG_PCI_CNB20LE_QUIRK)	+= broadcom_bus.o
 
 ifeq ($(CONFIG_PCI_DEBUG),y)

arch/x86/pci/acpi.c

@@ -149,7 +149,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 	unsigned long flags;
-	u64 start, end;
+	u64 start, orig_end, end;
 
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
@@ -165,7 +165,21 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 
 	start = addr.minimum + addr.translation_offset;
-	end = addr.maximum + addr.translation_offset;
+	orig_end = end = addr.maximum + addr.translation_offset;
+
+	/* Exclude non-addressable range or non-addressable portion of range */
+	end = min(end, (u64)iomem_resource.end);
+	if (end <= start) {
+		dev_info(&info->bridge->dev,
+			"host bridge window [%#llx-%#llx] "
+			"(ignored, not CPU addressable)\n", start, orig_end);
+		return AE_OK;
+	} else if (orig_end != end) {
+		dev_info(&info->bridge->dev,
+			"host bridge window [%#llx-%#llx] "
+			"([%#llx-%#llx] ignored, not CPU addressable)\n",
+			start, orig_end, end + 1, orig_end);
+	}
 
 	res = &info->res[info->res_num];
 	res->name = info->name;

arch/x86/pci/amd_bus.c

@@ -30,34 +30,6 @@ static struct pci_hostbridge_probe pci_probes[] __initdata = {
 	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 },
 };
 
-static u64 __initdata fam10h_mmconf_start;
-static u64 __initdata fam10h_mmconf_end;
-static void __init get_pci_mmcfg_amd_fam10h_range(void)
-{
-	u32 address;
-	u64 base, msr;
-	unsigned segn_busn_bits;
-
-	/* assume all cpus from fam10h have mmconf */
-        if (boot_cpu_data.x86 < 0x10)
-		return;
-
-	address = MSR_FAM10H_MMIO_CONF_BASE;
-	rdmsrl(address, msr);
-
-	/* mmconfig is not enable */
-	if (!(msr & FAM10H_MMIO_CONF_ENABLE))
-		return;
-
-	base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
-
-	segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
-			 FAM10H_MMIO_CONF_BUSRANGE_MASK;
-
-	fam10h_mmconf_start = base;
-	fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
-}
-
 #define RANGE_NUM 16
 
 /**
@@ -85,6 +57,9 @@ static int __init early_fill_mp_bus_info(void)
 	u64 val;
 	u32 address;
 	bool found;
+	struct resource fam10h_mmconf_res, *fam10h_mmconf;
+	u64 fam10h_mmconf_start;
+	u64 fam10h_mmconf_end;
 
 	if (!early_pci_allowed())
 		return -1;
@@ -211,12 +186,17 @@ static int __init early_fill_mp_bus_info(void)
 		subtract_range(range, RANGE_NUM, 0, end);
 
 	/* get mmconfig */
-	get_pci_mmcfg_amd_fam10h_range();
+	fam10h_mmconf = amd_get_mmconfig_range(&fam10h_mmconf_res);
 	/* need to take out mmconf range */
-	if (fam10h_mmconf_end) {
-		printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end);
+	if (fam10h_mmconf) {
+		printk(KERN_DEBUG "Fam 10h mmconf %pR\n", fam10h_mmconf);
+		fam10h_mmconf_start = fam10h_mmconf->start;
+		fam10h_mmconf_end = fam10h_mmconf->end;
 		subtract_range(range, RANGE_NUM, fam10h_mmconf_start,
 				 fam10h_mmconf_end + 1);
+	} else {
+		fam10h_mmconf_start = 0;
+		fam10h_mmconf_end = 0;
 	}
 
 	/* mmio resource */

arch/x86/platform/uv/tlb_uv.c

@@ -1575,14 +1575,14 @@ static int calculate_destination_timeout(void)
 		ts_ns = base * mult1 * mult2;
 		ret = ts_ns / 1000;
 	} else {
-		/* 4 bits  0/1 for 10/80us, 3 bits of multiplier */
-		mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
+		/* 4 bits  0/1 for 10/80us base, 3 bits of multiplier */
+		mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
 		mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
 		if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
-			mult1 = 80;
+			base = 80;
 		else
-			mult1 = 10;
-		base = mmr_image & UV2_ACK_MASK;
+			base = 10;
+		mult1 = mmr_image & UV2_ACK_MASK;
 		ret = mult1 * base;
 	}
 	return ret;
@@ -1820,6 +1820,8 @@ static int __init uv_bau_init(void)
 			uv_base_pnode = uv_blade_to_pnode(uvhub);
 	}
 
+	enable_timeouts();
+
 	if (init_per_cpu(nuvhubs, uv_base_pnode)) {
 		nobau = 1;
 		return 0;
@@ -1830,7 +1832,6 @@ static int __init uv_bau_init(void)
 		if (uv_blade_nr_possible_cpus(uvhub))
 			init_uvhub(uvhub, vector, uv_base_pnode);
 
-	enable_timeouts();
 	alloc_intr_gate(vector, uv_bau_message_intr1);
 
 	for_each_possible_blade(uvhub) {

block/scsi_ioctl.c

@@ -24,6 +24,7 @@
 #include <linux/capability.h>
 #include <linux/completion.h>
 #include <linux/cdrom.h>
+#include <linux/ratelimit.h>
 #include <linux/slab.h>
 #include <linux/times.h>
 #include <asm/uaccess.h>
@@ -691,6 +692,57 @@ int scsi_cmd_ioctl(struct request_queue *q, struct gendisk *bd_disk, fmode_t mod
 }
 EXPORT_SYMBOL(scsi_cmd_ioctl);
 
+int scsi_verify_blk_ioctl(struct block_device *bd, unsigned int cmd)
+{
+	if (bd && bd == bd->bd_contains)
+		return 0;
+
+	/* Actually none of these is particularly useful on a partition,
+	 * but they are safe.
+	 */
+	switch (cmd) {
+	case SCSI_IOCTL_GET_IDLUN:
+	case SCSI_IOCTL_GET_BUS_NUMBER:
+	case SCSI_IOCTL_GET_PCI:
+	case SCSI_IOCTL_PROBE_HOST:
+	case SG_GET_VERSION_NUM:
+	case SG_SET_TIMEOUT:
+	case SG_GET_TIMEOUT:
+	case SG_GET_RESERVED_SIZE:
+	case SG_SET_RESERVED_SIZE:
+	case SG_EMULATED_HOST:
+		return 0;
+	case CDROM_GET_CAPABILITY:
+		/* Keep this until we remove the printk below.  udev sends it
+		 * and we do not want to spam dmesg about it.   CD-ROMs do
+		 * not have partitions, so we get here only for disks.
+		 */
+		return -ENOTTY;
+	default:
+		break;
+	}
+
+	/* In particular, rule out all resets and host-specific ioctls.  */
+	printk_ratelimited(KERN_WARNING
+			   "%s: sending ioctl %x to a partition!\n", current->comm, cmd);
+
+	return capable(CAP_SYS_RAWIO) ? 0 : -ENOTTY;
+}
+EXPORT_SYMBOL(scsi_verify_blk_ioctl);
+
+int scsi_cmd_blk_ioctl(struct block_device *bd, fmode_t mode,
+		       unsigned int cmd, void __user *arg)
+{
+	int ret;
+
+	ret = scsi_verify_blk_ioctl(bd, cmd);
+	if (ret < 0)
+		return ret;
+
+	return scsi_cmd_ioctl(bd->bd_disk->queue, bd->bd_disk, mode, cmd, arg);
+}
+EXPORT_SYMBOL(scsi_cmd_blk_ioctl);
+
 static int __init blk_scsi_ioctl_init(void)
 {
 	blk_set_cmd_filter_defaults(&blk_default_cmd_filter);

drivers/acpi/acpica/dsargs.c

@@ -387,5 +387,29 @@ acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
 	status = acpi_ds_execute_arguments(node, node->parent,
 					   extra_desc->extra.aml_length,
 					   extra_desc->extra.aml_start);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Validate the region address/length via the host OS */
+
+	status = acpi_os_validate_address(obj_desc->region.space_id,
+					  obj_desc->region.address,
+					  (acpi_size) obj_desc->region.length,
+					  acpi_ut_get_node_name(node));
+
+	if (ACPI_FAILURE(status)) {
+		/*
+		 * Invalid address/length. We will emit an error message and mark
+		 * the region as invalid, so that it will cause an additional error if
+		 * it is ever used. Then return AE_OK.
+		 */
+		ACPI_EXCEPTION((AE_INFO, status,
+				"During address validation of OpRegion [%4.4s]",
+				node->name.ascii));
+		obj_desc->common.flags |= AOPOBJ_INVALID;
+		status = AE_OK;
+	}
+
 	return_ACPI_STATUS(status);
 }