Updating version numbers to 3.2.0

README.md

@@ -53,9 +53,9 @@ If you don't have adminstrator privileges, there are other options.
 If you have the `libhts-dev` installed, to build `abismal` the
 following should work:
 ```console
-$ wget https://github.com/smithlabcode/abismal/releases/download/v3.1.1/abismal-3.1.1.tar.gz
-$ tar -zxvf abismal-3.1.1.tar.gz
-$ cd abismal-3.1.1
+$ wget https://github.com/smithlabcode/abismal/releases/download/v3.2.0/abismal-3.2.0.tar.gz
+$ tar -zxvf abismal-3.2.0.tar.gz
+$ cd abismal-3.2.0
 $ mkdir build && cd build
 $ ../configure --prefix=/where/you/want/abismal
 $ make
@@ -84,9 +84,9 @@ be needed below. If you don't already have `abismal` downloaded, the next
 step is to download it. Here we will assume you are using a release rather
 than a clone. To build from a clone involves at least one more step.
 ```console
-$ wget https://github.com/smithlabcode/abismal/releases/download/v3.1.1/abismal-3.1.1.tar.gz
-$ tar -zxvf abismal-3.1.1.tar.gz
-$ cd abismal-3.1.1
+$ wget https://github.com/smithlabcode/abismal/releases/download/v3.2.0/abismal-3.2.0.tar.gz
+$ tar -zxvf abismal-3.2.0.tar.gz
+$ cd abismal-3.2.0
 ```
 Finally, these steps build the software:
 ```console

configure.ac

@@ -1,6 +1,6 @@
 dnl This file is part of abismal
 dnl
-dnl Copyright (C) 2019-2022: Andrew D. Smith and Guilherme de Sena Brandine
+dnl Copyright (C) 2019-2023: Andrew D. Smith and Guilherme de Sena Brandine
 dnl
 dnl Authors: Andrew D. Smith and Guilherme de Sena Brandine
 dnl
@@ -14,7 +14,7 @@ dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
 dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 dnl General Public License for more details.
 
-AC_INIT([abismal], [3.1.1], [[email protected]],
+AC_INIT([abismal], [3.2.0], [[email protected]],
         [abismal], [https://github.com/smithlabcode/abismal])
 
 dnl the config.h is not currently #included in the source, and only

docs/MANUAL.md

@@ -49,9 +49,9 @@ substantially.
 
 Run the following commands to install abismal
 ```
-wget https://github.com/smithlabcode/abismal/releases/download/v3.1.1/abismal-3.1.1.tar.gz
-tar -xvzf abismal-3.1.1.tar.gz
-cd abismal-3.1.1
+wget https://github.com/smithlabcode/abismal/releases/download/v3.2.0/abismal-3.2.0.tar.gz
+tar -xvzf abismal-3.2.0.tar.gz
+cd abismal-3.2.0
 ./configure --prefix=$(pwd)
 make
 make install
@@ -317,7 +317,7 @@ sequence.
 The last line of the headers is a copy of how the program was called
 to generate the SAM output, and is of the form
 ```
-@PG ID:ABISMAL  VN:3.1.1  CL:"[command-call]"
+@PG ID:ABISMAL  VN:3.2.0  CL:[command-call]
 ```
 where [command-call] is the shell command used to run abismal.
 

docs/abismal.1

@@ -57,9 +57,9 @@ Run the following commands to install abismal
 .IP
 .nf
 \f[C]
-wget https://github.com/smithlabcode/abismal/releases/download/v3.1.1/abismal-3.1.1.tar.gz
-tar -xvzf abismal-3.1.1.tar.gz
-cd abismal-3.1.1
+wget https://github.com/smithlabcode/abismal/releases/download/v3.2.0/abismal-3.2.0.tar.gz
+tar -xvzf abismal-3.2.0.tar.gz
+cd abismal-3.2.0
 \&./configure --prefix=$(pwd)
 make
 make install
@@ -364,7 +364,7 @@ generate the SAM output, and is of the form
 .IP
 .nf
 \f[C]
-\[at]PG ID:ABISMAL  VN:3.1.1  CL:\[dq][command-call]\[dq]
+\[at]PG ID:ABISMAL  VN:3.2.0  CL:\[dq][command-call]\[dq]
 \f[R]
 .fi
 .PP

docs/abismal.html

@@ -65,9 +65,9 @@ <h1 id="description">DESCRIPTION</h1>
 <p>absimal was built to map short reads of up to 250 bases. It should successfully map reads of size up to 1 million, but because it uses very short seeds for filtration, the mapping time will increase substantially.</p>
 <h1 id="quick-installation">QUICK INSTALLATION</h1>
 <p>Run the following commands to install abismal</p>
-<pre><code>wget https://github.com/smithlabcode/abismal/releases/download/v3.1.1/abismal-3.1.1.tar.gz
-tar -xvzf abismal-3.1.1.tar.gz
-cd abismal-3.1.1
+<pre><code>wget https://github.com/smithlabcode/abismal/releases/download/v3.2.0/abismal-3.2.0.tar.gz
+tar -xvzf abismal-3.2.0.tar.gz
+cd abismal-3.2.0
 ./configure --prefix=$(pwd)
 make
 make install</code></pre>
@@ -204,7 +204,7 @@ <h2 id="output-headers">Output headers</h2>
 <pre><code>@SQ SN:[chrom-name] LN:[chrom-length]</code></pre>
 <p>where [chrom-name] is given by the first word of the chromosome name in the FASTA file (anything after the first white space is deleted), and [chrom-length] is the number of bases in the chromosome sequence.</p>
 <p>The last line of the headers is a copy of how the program was called to generate the SAM output, and is of the form</p>
-<pre><code>@PG ID:ABISMAL  VN:3.1.1  CL:&quot;[command-call]&quot;</code></pre>
+<pre><code>@PG ID:ABISMAL  VN:3.2.0  CL:&quot;[command-call]&quot;</code></pre>
 <p>where [command-call] is the shell command used to run abismal.</p>
 <h2 id="output-mapped-lines">Output mapped lines</h2>
 <p>Following the header lines, reads that are mapped once (or at least once if the -a flag is used) are reported. Each read is a set of thirteen tab-separated fields as follows.</p>