Create Locale

[Jacobtey]

Hi. I came across your application
when I was looking for a way to send an isapi
command to trigger the alarm output of my camera.
a little background. I got a hiwatch camera ds-I114w.
it has a microphone, speaker and alarm input/output.
I adapted it for an intercom in conjunction with
tinycam on a smart TV. I turned off all the alarm input sensors on the camera.
and in tinycam I set up wake-up and sound alerts based on motion.
I chose On-camera motion sensor as the source.
With these settings, when the alarm input closes,
tinycam thinks that there is movement and wakes up the smart TV
and opens the image. tinycam doesn’t have exactly my camera,
but I chose the first hikvision I came across
and the interface has icons for turning on the microphone and speaker.
and even send an audio file to the camera.
but there is no way to send an isapi trigger to an alarm output.
What needs to be added to your program
to implement this?

tntnx.

p.s. localization would be nice

[speedfox-uk]

Hi,

Thanks for you comments. This was something I put together for my own project, so I don't really have to to maintain it properly to add extra features or localisation, but if you have the time fork the project and go right ahead.

Here is the link on my blog which explains the work I have done on this so far. If you scroll to the bottom, you will see a link that says "ISAPI Documentation", that should have the information you are looking for to trigger alarm outputs, if your camera supports that.

Good luck.