geli_remote_unlock

This RC Script automatically unlocks geli encrypted disks with key and passphrase files obtained from a remote system via ssh.

• Encrypt your disks, store the key and passphrase files on another server.

  • You can now reboot your server with no user interaction.

• Store key and passphrase files on different servers.

  • Of course both servers must be up for a successful disk decryption.

• Encrypt key and passphrase files so they can be stored on untrusted systems.

• This script cannot be used to unlock encrypted root partitions!

Setup

There are some steps necessary to get everything working. You may want to adjust the following procedure according to your needs.

Remote

Server(s) storing the keyfiles and passphrases.

Create a SSH-Keypair (without password), and place the public part of it into the ~/.ssh/authorized_keys file.

To make things work and narrow down the attack surface if that key gets lost, prefix it with the command and restrict option:

# retrieve unlocking keys for my awesome server
command="/path/to/geliremoteprovider.sh",restrict ssh-ed25519 [...] user@hostname

Fore more information see contents of remote folder.

Local

(FreeBSD-)Server with your encrypted drive(s).

Install the script itself into /usr/local/etc/rc.d:

fetch https://raw.githubusercontent.com/spookey/geli_remote_unlock/main/geliremoteunlock -o /usr/local/etc/rc.d/geliremoteunlock
chmod +x /usr/local/etc/rc.d/geliremoteunlock

Partitions

You need some encrypted zpool to get unlocked by geliremoteunlock. In this example I'll create a zpool creatively named tank.

First, create the key:

mkdir /root/keys
chmod go-rwx /root/keys

dd if=/dev/random of=/root/keys/tank.key bs=256k count=1

If not already done, create a partition (you may want to adjust the size). In this example it is created on the disk ada0:

gpart add -a 4k -s 32G -t freebsd-zfs -l tank ada0

Now, a /dev/gpt/tank partition should show up. This is how to encrypt it:

geli init -K /root/keys/tank.key -s 4096 -l 256 /dev/gpt/tank

Be creative with the passphrase. Don't forget it, you'll need it to unlock it now:

geli attach -k /root/keys/tank.key /dev/gpt/tank

Now, a /dev/gpt/tank.eli partition should show up. Finally create the zpool and zfs volumes inside it:

zpool create tank /dev/gpt/tank.eli

The zpool should now be mounted as /tank.

Keys & Passphrases

The keyfile was generated as /root/keys/tank.key. You should now create a passphrase file alongside:

Write your passphrase into a textfile (without newline at the end) into /root/keys/tank.pass.

Optional, but very recommended - encrypt the key and passphrase files:

openssl enc -aes-256-cbc -a -pbkdf2 -salt \
    -in /root/keys/tank.key \
    -out /root/keys/tank.key.aes \
    -pass "pass:f1144647f681194a666b1f19c4eb83e1"

openssl enc -aes-256-cbc -a -pbkdf2 -salt \
    -in /root/keys/tank.pass \
    -out /root/keys/tank.pass.aes \
    -pass "pass:f600f3a243d0ce33f7bab4ad16c59e91"

The *.aes files should be uploaded to the remote server(s). (-pass is just some random string, created using e.g: printf "tank.key" | md5 - please be more creative than that! You'll need them later, see below)

NOTE: /root/keys is in an unencrypted location! After transferring the *.aes files you should make an offsite backup of the unencrypted keys (thumb drive in a secure location, etc.) and delete them afterwards.

Configuration

This software needs some configuration inside of /etc/rc.conf.

Enable the script itself:

geliremoteunlock_enable="YES"

Define the pools which shall be unlocked:

geliremoteunlock_pools="data tank"

From now on every setting can be bound to a specific pool (geliremoteunlock_data_foo, geliremoteunlock_tank_foo) or to apply for all pools (geliremoteunlock_foo).

Specify where the pools are located:

geliremoteunlock_data_devices="/dev/gpt/data"
geliremoteunlock_tank_devices="/dev/gpt/tank"

Specify information where to get the keyfiles:

geliremoteunlock_keyfile_host="[email protected]"
geliremoteunlock_keyfile_ident="/root/.ssh/unlock_key_ed25519"

geliremoteunlock_data_keyfile_name="data.key.aes"
geliremoteunlock_data_keyfile_password="7179227046a1cdc8bb0e9a81523a6822"

geliremoteunlock_tank_keyfile_name="tank.key.aes"
geliremoteunlock_tank_keyfile_password="f1144647f681194a666b1f19c4eb83e1"

And now the same for the passphrases:

geliremoteunlock_passphrase_host="[email protected]"
geliremoteunlock_passphrase_ident="/root/.ssh/unlock_pass_ed25519"

geliremoteunlock_data_passphrase_name="data.pass.aes"
geliremoteunlock_data_passphrase_password="46cf04febc44b6e0d956bf034f3d11aa"

geliremoteunlock_tank_passphrase_name="tank.pass.aes"
geliremoteunlock_tank_passphrase_password="f600f3a243d0ce33f7bab4ad16c59e91"

Origins

This project is a loosely rewrite of geliUnlocker.

I just wanted to solve the same problems, but in a little different way.

The changes are different enough that forking was not really an option.

Thanks for that original awesome work - it helped a lot!