WebRTC/RTSP/RTMP/HLS Bridge for Wyze Cam

Create a local WebRTC, RTSP, RTMP, or HLS/Low-Latency HLS stream for most of your Wyze cameras including the outdoor, doorbell, and 2K cams.

No modifications, third-party, or special firmware required.

It just works!

Streams direct from camera without additional bandwidth or subscriptions.

Please consider ⭐️ starring or ☕️ sponsoring this project if you found it useful, or use the affiliate link when shopping on amazon!

Important

As of May 2024, you will need an API Key and API ID from: https://support.wyze.com/hc/en-us/articles/16129834216731.

Warning

Please double check your router/firewall and do NOT forward ports or enable DMZ access to the bridge unless you know what you are doing!

See the supported cameras section for additional information.

Quick Start

Install docker and run:

docker run -p 8554:8554 -p 8888:8888 -p 5050:5000 -e WB_AUTH=false mrlt8/wyze-bridge

You can then use the web interface at http://localhost:5050 where localhost is the hostname or ip of the machine running the bridge.

See basic usage for additional information or visit the wiki page for additional information on using the bridge as a Home Assistant Add-on.

What's Changed in v2.10.3

• FIX: Increased MTX_WRITEQUEUESIZE to prevent issues with higher bitrates.
• FIX: Restart RTMP livestream on fail (#1333)
• FIX: Restore user data on bridge restart (#1334)
• NEW: SNAPSHOT_KEEP Option to delete old snapshots when saving snapshots with a timelapse-like custom format with SNAPSHOT_FORMAT. (#1330)
  • Example for 3 min: SNAPSHOT_KEEP=180, SNAPSHOT_KEEP=180s, SNAPSHOT_KEEP=3m
  • Example for 3 days: SNAPSHOT_KEEP=72h, SNAPSHOT_KEEP=3d
  • Example for 3 weeks: SNAPSHOT_KEEP=21d, SNAPSHOT_KEEP=3w
• NEW: RESTREAMIO option for livestreaming via restream.io. (#1333)
  • Example RESTREAMIO_FRONT_DOOR=re_My_Custom_Key123

What's Changed in v2.10.2

• FIX: day/night FPS slowdown for V4 cameras (#1287) Thanks @cdoolin and @Answer-1!
• NEW: Update battery level in WebUI

What's Changed in v2.10.0/v2.10.1

FIXED: Could not disable WB_AUTH if WB_API is set. (#1304)

WebUI Authentication

Simplify default credentials for the WebUI:

• This will not affect users who are setting their own WB_PASSWORD and WB_API.
• Default WB_PASSWORD will now be derived from the username part of the Wyze email address instead of using a randomly generated password.
  • Example: For the email address [email protected], the WB_PASSWORD will be john123.
• Default WB_API will be based on the wyze account for persistance.

Stream Authentication

NEW: STREAM_AUTH option to specify multiple users and paths:

• Username and password should be separated by a :
• An additional : can be used to specify the allowed IP address for the user.
  • This does NOT work with docker desktop
  • Specify multiple IPs using a comma
• Use the @ to specify paths accessible to the user.
  • Paths are optional for each user.
  • Multiple paths can be specified by using a comma. If none are provided, the user will have access to all paths/streams
• Multiple users can be specified by using | as a separator

EXAMPLE:

STREAM_AUTH=user:pass@cam-1,other-cam|second-user:password@just-one-cam|user3:pass

• user:pass has access to cam-1 and other-cam
• second-user:password has access to just-one-cam
• user3:pass has access to all paths/cameras

See Wiki for more information and examples.

Recording via MediaMTX

Recoding streams has been updated to use MediaMTX with the option to delete older clips.

Use RECORD_ALL or RECORD_CAM_NAME to enable recording.

• RECORD_PATH Available variables are %path or {cam_name}, %Y %m %d %H %M %S %f %s (time in strftime format).
• RECORD_LENGTH Length of each clip. Use s for seconds , h for hours. Defaults to 60s
• RECORD_KEEP Delete older clips. Use s for seconds , h for hours. Set to 0s to disable automatic deletion. Defaults to 0s

View previous changes

FAQ

• How does this work?
  • It uses the same SDK as the app to communicate directly with the cameras. See kroo/wyzecam for details.
• Does it use internet bandwidth when streaming?
  • Not in most cases. The bridge will attempt to stream locally if possible but will fallback to streaming over the internet if you're trying to stream from a different location or from a shared camera. See the wiki for more details.
• Can this work offline/can I block all wyze services?
  • No. Streaming should continue to work without an active internet connection, but will probably stop working after some time as the cameras were not designed to be used without the cloud. Some camera commands also depend on the cloud and may not function without an active connection. See wz_mini_hacks for firmware level modification to run the camera offline.
• Why aren't all wyze cams supported yet (OG/Doorbell Pro)?
  • These cameras are using a different SDK and will require a different method to connect and stream. See the awesome cryze project by @carTloyal123.

Compatibility

Should work on most x64 systems as well as on most modern arm-based systems like the Raspberry Pi 3/4/5 or Apple Silicon M1/M2/M3.

The container can be run on its own, in Portainer, Unraid, as a Home Assistant Add-on, locally or remotely in the cloud.

Ubiquiti Unifi

Note

Some network adjustments may be needed - see this discussion for more information.

Supported Cameras

Important

Some newer camera firmware versions may cause issues with remote access via P2P. Local "LAN" access seems unaffected at this time. A temporary solution is to use a VPN. See the OpenVPN example.

Camera	Model	Tutk Support	Latest FW
Wyze Cam v1 [HD only]	WYZEC1	✅	3.9.4.x
Wyze Cam V2	WYZEC1-JZ	✅	4.9.9.x
Wyze Cam V3	WYZE_CAKP2JFUS	✅	4.36.11.x
Wyze Cam V4 [2K]	HL_CAM4	✅	4.52.3.x
Wyze Cam Floodlight	WYZE_CAKP2JFUS	✅	4.36.11.x
Wyze Cam Floodlight V2 [2k]	HL_CFL2	✅	4.53.2.x
Wyze Cam V3 Pro [2K]	HL_CAM3P	✅	4.58.11.x
Wyze Cam Pan	WYZECP1_JEF	✅	4.10.9.x
Wyze Cam Pan v2	HL_PAN2	✅	4.49.11.x
Wyze Cam Pan v3	HL_PAN3	✅	4.50.4.x
Wyze Cam Pan Pro [2K]	HL_PANP	✅	-
Wyze Cam Outdoor	WVOD1	✅	4.17.4.x
Wyze Cam Outdoor v2	HL_WCO2	✅	4.48.4.x
Wyze Cam Doorbell	WYZEDB3	✅	4.25.1.x
Wyze Cam Doorbell v2 [2K]	HL_DB2	✅	4.51.1.x
Wyze Cam Doorbell Pro 2	AN_RDB1	❓	-
Wyze Battery Cam Pro	AN_RSCW	⚠️	-
Wyze Cam Flood Light Pro [2K]	LD_CFP	⚠️	-
Wyze Cam Doorbell Pro	GW_BE1	⚠️	-
Wyze Cam OG	GW_GC1	⚠️	-
Wyze Cam OG Telephoto 3x	GW_GC2	⚠️	-

Basic Usage

docker-compose (recommended)

This is similar to the docker run command, but will save all your options in a yaml file.

1. Install Docker Compose.
2. Use the sample as a guide to create a docker-compose.yml file with your wyze credentials.
3. Run docker-compose up.

Once you're happy with your config you can use docker-compose up -d to run it in detached mode.

Caution

If your credentials contain a $ character, you need to escape it with another $ sign (e.g., pa$$word > pa$$$$word) or leave your credentials blank and use the webUI to login.

Note

You may need to update the WebUI links if you're changing the ports or using a reverse proxy.

Updating your container

To update your container, cd into the directory where your docker-compose.yml is located and run:

docker-compose pull # Pull new image
docker-compose up -d # Restart container in detached mode
docker image prune # Remove old images

🏠 Home Assistant

Visit the wiki page for additional information on Home Assistant.

Additional Info

• Camera Commands (MQTT/REST API)
• Two-Factor Authentication (2FA/MFA)
• ARM/Apple Silicon/Raspberry Pi
• Network Connection Modes
• Portainer
• Unraid
• Home Assistant
• Homebridge Camera FFmpeg
• HomeKit Secure Video
• WebUI API

Web-UI

The bridge features a basic Web-UI which can display a preview of all your cameras as well as direct links to all the video streams.

The web-ui can be accessed on the default port 5000:

http://localhost:5000/

See also:

• WebUI page
• WebUI API page

WebRTC

WebRTC should work automatically in Home Assistant mode, however, some additional configuration is required to get WebRTC working in the standard docker mode.

• WebRTC requires two additional ports to be configured in docker:

    ports:
      ...
      - 8889:8889 #WebRTC
      - 8189:8189/udp # WebRTC/ICE

• In addition, the WB_IP env needs to be set with the IP address of the server running the bridge.

    environment:
      - WB_IP=192.168.1.116

• See documentation for additional information/options.

Advanced Options

All environment variables are optional.

• Audio
• Bitrate and Resolution
• Camera Substreams
• MQTT Configuration
• Filtering Cameras
• Doorbell/Camera Rotation
• Custom FFmpeg Commands
• Interval Snapshots
• Stream Recording and Livestreaming
• rtsp-simple-server/MediaMTX Config
• Offline/IFTTT Webhook
• Proxy Stream from RTSP Firmware
• BOA HTTP Server/Motion Alerts
• Debugging Options

Other Wyze Projects

Honorable Mentions:

• @noelhibbard's script - Original script that the bridge is bassd on.
• kroo/wyzecam - Original library that the bridge is based on.

Video Streaming:

• gtxaspec/wz_mini_hacks - Firmware level modification for Ingenic based cameras with an RTSP server and self-hosted mode to use the cameras without the wyze services.
• thingino - Advanced custom firmware for some Ingenic-based wyze cameras.
• carTloyal123/cryze - Stream video from wyze cameras (Gwell cameras) that use the Iotvideo SDK from Tencent Cloud.
• xerootg/cryze_v2 - Stream video from wyze cameras (Gwell cameras) that use the Iotvideo SDK from Tencent Cloud.
• mnakada/atomcam_tools - Video streaming for Wyze v3.

General Wyze:

• shauntarves/wyze-sdk - python library to interact with wyze devices over the cloud.