This action wraps pi-gen to make it easily accessible in GitHub workflows.
Generated images can subsequently be used in workflows, e.g. uploaded as build artifacts or further processed.
pi-gen is the official tool to generate Raspberry Pi OS images that can be flashed on SD cards. Refer to the
pi-gen repository for detailed information on the scripts and its usage.
NOTE: This action requires a Debian-based distribution as runner (i.e. ubuntu-latest), since it invokes tools
like sudo and apt-get and relies on QEMU and other Linux native components.
The minimum input to the action will be the image-name and the stage-list containing the list of pi-gen stages
and/or custom stages. This will build all stages and export the last stage (including all previous changes) as an
image.
If multiple images should be exported, disable the export-last-stage-only property and configure pi-gen's
EXPORT_IMAGE in the respective stages accordingly.
This will keep the default pi-gen export directives unchanged. If changes in the pi-gen internal stages are
required, a custom stage at first position in the list could perform the changes
in the other directories.
If an image was built successfully, the action will set this property to point to the file. This will be located
in ${{ inputs.pi-gen-dir }}/deploy.
If NOOBS build is enabled by setting ${{ inputs.enable-noobs }} to true, the property will point to the directory
in pi-gen's output directory containing the build result.
The action exposes most of pi-gen's configuration properties as input variables and performs sanity checks on the
given input (or assumes) default values as stated in pi-gen's README.
If user config seems valid, the action will check out the configured ref of pi-gen locally and install required
host dependencies for the build.
Custom user stages (present as directories) are mounted to the build container and resolved in pi-gen's stage
configuration. The custom stage should follow pi-gen's
conventions to be executed properly. The action
tries to make sure the stage is respected and its changes are included in the final image.
- uses: usimd/pi-gen-action@v1
with:
# Compression to apply on final image (either "none", "zip", "xz" or "gz").
compression: zip
# Compression level to be used. From 0 to 9 (refer to the tool man page for more
# information on this. Usually 0 is no compression but very fast, up to 9 with the
# best compression but very slow).
compression-level: 6
# Disable the renaming of the first user during the first boot. This make it so
# 'username' stays activated. 'username' must be set for this to work. Please be
# aware of the implied security risk of defining a default username and password
# for your devices.
disable-first-boot-user-rename: 0
# Additional options to include in PIGEN_DOCKER_OPTS
docker-opts: ''
# Set whether a NOOBS image should be built as well. If enabled, the output
# directory containing the NOOBS files will be saved as output variable
# 'image-noobs-path'.
enable-noobs: false
# Enable SSH access to Pi.
enable-ssh: 0
# If this feature is enabled, the action will configure pi-gen to not export any
# stage as image but the last one defined in property 'stage-list'. This is
# helpful when building a single image flavor (in contrast to building a
# lite/server and full-blown desktop image), since it speeds up the build process
# significantly.
export-last-stage-only: true
# Comma or whitespace separated list of additional packages to install on host
# before running pi-gen. Use this list to add any packages your custom stages may
# require. Note that this is not affecting the final image. In order to add
# additional packages, you need to add a respective 'XX-packages' file in your
# custom stage.
extra-host-dependencies: ''
# Comma or whitespace separated list of additional modules to load on host before
# running pi-gen. If your custom stage requires additional software or kernel
# modules to be loaded, add them here. Note that this is not meant to configure
# modules to be loaded in the target image.
extra-host-modules: ''
# Token to use for checking out pi-gen repo.
github-token: ${{ github.token }}
# Host name of the image.
hostname: raspberrypi
# Final image name.
image-name: ''
# Enabling this option will remove plenty of components from the GitHub Actions
# runner that are not mandatory pre-requisites for a (vanilla) pi-gen build. This
# shall increase the available disk space so that also large images can be
# compiled on a free GHA runner (benchmark is the full image including a desktop
# environment). If any packages are missing during the build consider adding them
# to the `extra-host-dependencies` list.
increase-runner-disk-size: false
# Default keyboard keymap.
keyboard-keymap: gb
# Default keyboard layout.
keyboard-layout: English (UK)
# Default locale of the system image.
locale: en_GB.UTF-8
# Password of the intial user account, locked if empty.
password: ''
# Path where selected pi-gen ref will be checked out to. If the path does not yet
# exist, it will be created (including its parents).
pi-gen-dir: pi-gen
# The release name to use in `/etc/issue.txt`. The default should only be used for
# official Raspberry Pi builds.
pi-gen-release: Raspberry Pi reference
# GitHub repository to fetch pi-gen from, must be a fork from RPi-Distro/pi-gen.
pi-gen-repository: RPi-Distro/pi-gen
# Release version of pi-gen to use. This can both be a branch or tag name known in
# the pi-gen repository.
pi-gen-version: arm64
# Setting to `1` will disable password authentication for SSH and enable public
# key authentication. Note that if SSH is not enabled this will take effect when
# SSH becomes enabled.
pubkey-only-ssh: 0
# Setting this to a value will make that value the contents of the
# FIRST_USER_NAME's ~/.ssh/authorized_keys. Obviously the value should therefore
# be a valid authorized_keys file. Note that this does not automatically enable
# SSH.
pubkey-ssh-first-user: ''
# The release version to build images against. Valid values are jessie, stretch,
# buster, bullseye, bookworm, and testing.
release: bookworm
# Setting to `1` will prevent pi-gen from dropping the "capabilities" feature.
# Generating the root filesystem with capabilities enabled and running it from a
# filesystem that does not support capabilities (like NFS) can cause issues. Only
# enable this if you understand what it is.
setfcap: ''
# List of stage name to execute in given order. Relative and absolute paths to
# custom stage directories are allowed here. Note that by default pi-gen exports
# images in stage2 (lite), stage4 and stage5. You probably want to hook in custom
# stages before one of the exported stages. Otherwise, the action will make sure
# any custom stage will include an image export directive.
stage-list: stage0 stage1 stage2
# System timezone.
timezone: Europe/London
# Name of the initial user account.
username: pi
# Print all output from pi-gen.
verbose-output: false
# Wifi country code of default network to connect to.
wpa-country: ''
# SSID of a default wifi network to connect to.
wpa-essid: ''
# Password of default wifi network to connect to.
wpa-password: ''- Install NodeJS from Nodesource in the target image
- Enable detailed output from
pi-genbuild - Upload final image as artifact
- Modify
pi-geninternal stages - Increase GitHub Actions runner disk space
jobs:
pi-gen-nodejs:
runs-on: ubuntu-latest
steps:
# Create a stage 'test-stage' instructing to add Nodesource repo and install nodejs as dependency
- run: |
mkdir -p test-stage/package-test &&
{
cat > test-stage/package-test/00-run-chroot.sh <<-EOF
#!/bin/bash
apt-get install -y curl
curl -fsSL https://deb.nodesource.com/setup_22.x | bash -
EOF
} &&
chmod +x test-stage/package-test/00-run-chroot.sh &&
echo "nodejs" > test-stage/package-test/01-packages &&
{
cat > test-stage/prerun.sh <<-EOF
#!/bin/bash -e
if [ ! -d "\${ROOTFS_DIR}" ]; then
copy_previous
fi
EOF
} &&
chmod +x test-stage/prerun.sh
- uses: usimd/pi-gen-action@v1
with:
image-name: test
stage-list: stage0 stage1 stage2 ./test-stagejobs:
pi-gen-verbose:
runs-on: ubuntu-latest
steps:
- uses: usimd/pi-gen-action@v1
with:
image-name: test
verbose-output: truejobs:
pi-gen-upload-image:
runs-on: ubuntu-latest
steps:
- uses: usimd/pi-gen-action@v1
id: build
with:
image-name: test
- uses: actions/upload-artifact@v3
with:
name: pi-gen-image
path: ${{ steps.build.outputs.image-path }}In this scenario, a dummy preparation stage clean-stage is prepended to the list of stages which will remove
export directives of stage4 and stage5 in the internally mounted stage volumes.
jobs:
pi-gen-modified-stages:
runs-on: ubuntu-latest
steps:
- run: |
mkdir -p clean-stage &&
{
cat > clean-stage/prerun.sh <<-EOF
#!/bin/bash
rm -f ${{ github.workspace }}/${{ inputs.custom-pi-gen-dir }}/stage[45]/EXPORT*
EOF
} &&
chmod +x clean-stage/prerun.sh
- uses: usimd/pi-gen-action@v1
with:
image-name: test
stage-list: clean-stage stage0 stage1 stage2 custom-stage stage3 stage4
pi-gen-dir: ${{ inputs.custom-pi-gen-dir }}When building large images containing plenty of additional software (or maybe just the full image including a desktop environment) you may hit space boundaries on the (free and public) GitHub Actions runners.
There is however a workaround to increase this disk space by removing components you do not
need for your build on the runner. The implemented mechanism is heavily inspired by
easimon/maximize-build-space but focuses
on providing more root disk space where the Docker daemon runs the build (since this action
runs the pi-gen build always inside a container).
From current experience, this will reclaim between 25 and 30 GB of additional disk space
jobs:
pi-gen-with-larger-disk-space:
runs-on: ubuntu-latest
steps:
- uses: usimd/pi-gen-action@v1
with:
image-name: test
stage-list: stage0 stage1 stage2 stage3 stage4 stage5
increase-runner-disk-size: true
The scripts and documentation in this project are released under the MIT License