Releases: gloomyandy/RepRapFirmware
RepRapFirmware 3.4beta7 Port for STM32F4 (v3.4.0beta7_2)
Release Information
This is a port of RRF 3.4beta7 (including input shaping) for STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.4.0beta7_2
Whats New
- For details of what is new in 3.4beta7 please see here
- For details of changes for STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-08 from here. Instructions for STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.3 Port for LPC and STM32F4 (v3.3.0_14)
BigTreeTech SKR V2.0 Boards
Please see: https://teamgloomy.github.io/skr_2.0_general.html
Release Information
This is a port of RRF 3.3 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.3.0_14
Whats New
- For details of what is new in 3.3 please see here
- For details of changes for LPC/STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-05 (or later) from here. Instructions for LPC are here, STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for LPC and here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.4beta6 Port for STM32F4 (v3.4.0beta6_1)
Release Information
This is a port of RRF 3.4beta6 (including input shaping) for STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.4.0beta6_1
Whats New
- For details of what is new in 3.4beta6 please see here
- For details of changes for STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-08 from here. Instructions for STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.3 Port for LPC and STM32F4 (v3.3.0_11)
BigTreeTech SKR V2.0 Boards
Please see: https://teamgloomy.github.io/skr_2.0_general.html
Release Information
This is a port of RRF 3.3 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.3.0_11
Whats New
- For details of what is new in 3.3 please see here
- For details of changes for LPC/STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-05 (or later) from here. Instructions for LPC are here, STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for LPC and here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.4beta5 Port for STM32F4 (v3.4.0beta5_1)
Release Information
This is a port of RRF 3.4beta5 (including input shaping) for STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.4.0beta5_1
Whats New
- For details of what is new in 3.4beta5 please see here
- For details of changes for STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-08 from here. Instructions for STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.3 Port for LPC and STM32F4 (v3.3.0_10)
BigTreeTech SKR V2.0 Boards
Please see: https://teamgloomy.github.io/skr_2.0_general.html
Release Information
This is a port of RRF 3.3 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.3.0_10
Whats New
- For details of what is new in 3.3 please see here
- For details of changes for LPC/STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-05 from here. Instructions for LPC are here, STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for LPC and here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.4beta4 Port for STM32F4 (v3.4.0beta4_1)
Release Information
This is a port of RRF 3.4beta4 (including input shaping) for STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.4.0beta4_1
Whats New
- For details of what is new in 3.4beta4 please see here
- For details of changes for STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-07 from here. Instructions for STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.3 Port for LPC and STM32F4 (v3.3.0_9)
BigTreeTech SKR V2.0 Boards
Please see: https://teamgloomy.github.io/skr_2.0_general.html
Release Information
This is a port of RRF 3.3 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.3.0_9
Whats New
- For details of what is new in 3.3 please see here
- For details of changes for LPC/STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-05 from here. Instructions for LPC are here, STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for LPC and here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.4beta3 Port for STM32F4 (v3.4.0beta3+1_2)
Release Information
This is a port of RRF 3.4beta3 (including input shaping) for STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.4beta3+1_2
Whats New
- For details of what is new in 3.4beta3 please see here
- For details of changes for STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-05 from here. Instructions for STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk
RepRapFirmware 3.3 Port for LPC and STM32F4 (v3.3.0_8)
BigTreeTech SKR V2.0 Boards
Please see: https://teamgloomy.github.io/skr_2.0_general.html
Release Information
This is a port of RRF 3.3 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.3.0_8
Whats New
- For details of what is new in 3.3 please see here
- For details of changes for LPC/STM versions see here
NOTE 1: From V3.3beta1 onwards the STM32F4 version of RRF will not boot on hardware that is not recognised. If after installing this version your board does not appear to start please connect a USB terminal and check for error messages. If your board is not recognised please contact TeamGloomy so that we may add the board data.
Upgrade Information
WiFi Users
As well as updating the firmware, you need to update the following:
- ESP8266 and ESP32 firmware V1.26-05 from here. Instructions for LPC are here, STM32 ESP8266 are here and STM32 ESP32 are here
- DWC inline with the firmware version from here.
SBC Users
Please follow the instructions from here for LPC and here for STM32
Issues and Support
Please report problems/ask questions using our Discord server (see the Wiki for details).
This firmware comes with no warranty (implied or otherwise) - use at your own risk