Releases: gloomyandy/RepRapFirmware
RepRapFirmware 3.2.2 Port for LPC and STM32F4 (v3.2.2_2)
This is a port of RRF 3.2.2 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
- For details of what is new in 3.2.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.25 please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.25-01
- SBC users will need to update the SBC software to V3.2.2. For STM users see https://teamgloomy.github.io/stm32_sbc.html for LPC users see: https://teamgloomy.github.io/lpc_sbc.html
LPC users need to ensure that the following changes are made to the dsf config.json file:
"SpiTransferMode": 3
"SpiBufferSize": 3072
"MaxCodeBufferSize": 200
"MaxMessageLength": 2560
NOTE: In this version of the firmware the default operating mode for TMC22xx drivers has changed from Spreadcycle to Stealthchop to match the documentation and Duet3D settings. This means that if you previously had no explicit "D" setting on M569 commands you will need to add D2 to have the same settings as before.
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.2.2_2
RepRapFirmware 3.2 Port for LPC and STM32F4 (v3.2_7)
Note: This is a pre-release to enable testing of new features and bug fixes. Please use with care. The current stable release is V3.2_1, which can be found here: https://github.com/gloomyandy/RepRapFirmware/releases/tag/v3.2_1
This is a port of RRF 3.2 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
- For details of what is new in 3.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.25 please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.25-01
- SBC users will need to update the SBC software to V3.2. For STM users see https://teamgloomy.github.io/stm32_sbc.html for LPC users see: https://teamgloomy.github.io/lpc_sbc.html
LPC users need to ensure that the following changes are made to the dsf config.json file:
"SpiTransferMode": 3
"SpiBufferSize": 3072
"MaxCodeBufferSize": 200
"MaxMessageLength": 2560
NOTE: In this version of the firmware the default operating mode for TMC22xx drivers has changed from Spreadcycle to Stealthchop to match the documentation and Duet3D settings. This means that if you previously had no explicit "D" setting on M569 commands you will need to add D2 to have the same settings as before.
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.2_7
RepRapFirmware 3.2 Port for LPC and STM32F4 (v3.2_4)
Note: This is a pre-release to enable testing of new features and bug fixes. Please use with care. The current stable release is V3.2_1, which can be found here: https://github.com/gloomyandy/RepRapFirmware/releases/tag/v3.2_1
This is a port of RRF 3.2 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
- For details of what is new in 3.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.25 please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.25-01
- SBC users will need to update the SBC software to V3.2. For STM users see https://teamgloomy.github.io/stm32_sbc.html for LPC users see: https://teamgloomy.github.io/lpc_sbc.html
LPC users need to ensure that the following changes are made to the dsf config.json file:
"SpiTransferMode": 3
"SpiBufferSize": 3072
"MaxCodeBufferSize": 200
"MaxMessageLength": 2560
NOTE: In this version of the firmware the default operating mode for TMC22xx drivers has changed from Spreadcycle to Stealthchop to match the documentation and Duet3D settings. This means that if you previously had no explicit "D" setting on M569 commands you will need to add D2 to have the same settings as before.
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.2_4
RepRapFirmware 3.2 Port for LPC and STM32F4 (v3.2_1)
This is a port of RRF 3.2 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://teamgloomy.github.io/supported_boards.html).
- For details of what is new in 3.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.25 please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.25-01
- SBC users will need to update the SBC software to V3.2. For STM users see https://teamgloomy.github.io/stm32_sbc.html for LPC users see: https://teamgloomy.github.io/lpc_sbc.html
LPC users need to ensure that the following changes are made to the dsf config.json file:
"SpiTransferMode": 3
"SpiBufferSize": 3072
"MaxCodeBufferSize": 200
"MaxMessageLength": 2560
NOTE: In this version of the firmware the default operating mode for TMC22xx drivers has changed from Spreadcycle to Stealthchop to match the documentation and Duet3D settings. This means that if you previously had no explicit "D" setting on M569 commands you will need to add D2 to have the same settings as before.
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.2_1
RepRapFirmware 3.2-RC2 Port for LPC and STM32F4 (v3.2-RC2_2)
This is a port of RRF 3.2-RC2 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://github.com/gloomyandy/RepRapFirmware/wiki).
- For details of what is new in 3.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.25B0 please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.25B0-01
- SBC users will need to update the SBC software to V3.2-RC2. For STM users see https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-STM32 for LPC users see: https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-LPC-Unstable
LPC users need to ensure that the following changes are made to the dsf config.json file:
"SpiTransferMode": 3
"SpiBufferSize": 3072
"MaxCodeBufferSize": 200
"MaxMessageLength": 2560
NOTE: In this version of the firmware the default operating mode for TMC22xx drivers has changed from Spreadcycle to Stealthchop to match the documentation and Duet3D settings. This means that if you previously had no explicit "D" setting on M569 commands you will need to add D2 to have the same settings as before.
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.2-beta4.1_1
RepRapFirmware 3.2-beta4.1 Port for LPC and STM32F4 (v3.2-beta4.1_1)
This is a port of RRF 3.2-beta4.1 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://github.com/gloomyandy/RepRapFirmware/wiki).
- For details of what is new in 3.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.25B0 please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.25B0-01
- SBC users will need to update the SBC software to V3.2-beta4. For STM users see https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-STM32 for LPC users see: https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-LPC-Unstable
- NOTE: In this version of the firmware the default operating mode for TMC22xx drivers has changed from Spreadcycle to Stealthchop to match the documentation and Duet3D settings. This means that if you previously had no explicit "D" setting on M569 commands you will need to add D2 to have the same settings as before.
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.2-beta4.1_1
RepRapFirmware 3.2-beta3.2 Port for LPC and STM32F4 (v3.2-beta3.2_1)
This is a port of RRF 3.2-beta3.2 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://github.com/gloomyandy/RepRapFirmware/wiki).
- For details of what is new in 3.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.24 (if you are using 3.2-beta1 you may already have this version) please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.24-01
- SBC users will need to update the SBC software to V3.2-beta3. For STM users see https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-STM32 for LPC users see: https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-LPC-Unstable
- NOTE: In this version of the firmware the default operating mode for TMC22xx drivers has changed from Spreadcycle to Stealthchop to match the documentation and Duet3D settings. This means that if you previously had no explicit "D" setting on M569 commands you will need to add D2 to have the same settings as before.
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.2-beta3.2_1
RepRapFirmware 3.2-beta2 Port for LPC and STM32F4 (v3.2-beta2_2)
This is a port of RRF 3.2-beta2 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://github.com/gloomyandy/RepRapFirmware/wiki).
- For details of what is new in 3.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.24 (if you are using 3.2-beta1 you may already have this version) please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.24-01
- SBC users will need to update the SBC software to V3.2-beta2. For STM users see https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-STM32 for LPC users see: https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-LPC-Unstable
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild the source code for this release is tagged with v3.2-beta2_2
RepRapFirmware 3.2-beta1 Port for LPC and STM32F4 (3.2-beta1_2)
This is a port of RRF 3.2-beta1 for LPC and STM32F4 based processors (for a list of supported boards please see the Wiki https://github.com/gloomyandy/RepRapFirmware/wiki).
- For details of what is new in 3.2 please see https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md.
- For details of changes for LPC/STM versions see: https://github.com/gloomyandy/RepRapFirmware/blob/v3.02-dev-unified/WHATS_NEW_UNIFIED.md
- WiFi users will need updated ESP8266 firmware V1.24 please see: https://github.com/gloomyandy/DuetWiFiSocketServer/releases/tag/V1.24-01
- SBC users will need to update the SBC software to V3.2-beta1. For STM users see https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-STM32 for LPC users see: https://github.com/gloomyandy/RepRapFirmware/wiki/SBC-LPC-Unstable
Please be aware that some (possibly all) SanDisk SD cards may not work with this release (the card can not be read). This problem is scheduled to be investigated, for now please use a different brand of card if you have problems.
Please report problems/ask questions using our Discord server (see the Wiki for details).
This port of RepRapFirmware is experimental - use at your own risk
This version of the firmware uses a new build system for both LPC and STM versions please see: https://github.com/gloomyandy/RRFBuild
RepRapFirmware 3.1.1 Port for LPC (3.1.1-14)
This release contains a number of additions to the 3.1.1 release...
- Support for TMC2209 drivers which includes stall detection and sensorless homing
- Additional board configurations
- Support for updating ESP8266 WiFi firmware via the UART connection
- Various bug fixes and performance improvements
See https://github.com/gloomyandy/RepRapFirmware/blob/LPC_RRFv3.1.0/WHATS_NEW_LPC.md for details.
For details of configuring Sensorless homing and stall detection please see the following thread: https://reprap.org/forum/read.php?147,873914
Please note that the sample configuration files are out of date and may contain errors if used with the current release.
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md to see what's new in RepRapFirmware.
RepRap forum thread on V3.1 of the LPC port: https://reprap.org/forum/read.php?147,874661
LPC firmware specific Wiki: https://github.com/gloomyandy/RepRapFirmware/wiki
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V3.1.1 of the DSF. The version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.1.1
See the above V3 thread for details.