Releases: gloomyandy/RepRapFirmware
Experimental RepRapFirmware 3.1.1 Port for LPC (3.1.1-12)
This release contains a number of additions to the 3.1.1 release...
- Support for TMC2209 drivers which includes stall detection and sensorless homing
- Additional board configurations
- Support for updating ESP8266 WiFi firmware via the UART connection
- Various bug fixes and performance improvements
See https://github.com/gloomyandy/RepRapFirmware/blob/LPC_RRFv3.1.0/WHATS_NEW_LPC.md for details.
For details of configuring Sensorless homing and stall detection please see the following thread: https://reprap.org/forum/read.php?147,873914
Please note that the sample configuration files are out of date and may contain errors if used with the current release.
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md to see what's new in RepRapFirmware.
RepRap forum thread on V3.1 of the LPC port: https://reprap.org/forum/read.php?147,874661
LPC firmware specific Wiki: https://github.com/gloomyandy/RepRapFirmware/wiki
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V3.1.1 of the DSF. The version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.1.1
See the above V3 thread for details.
Experimental RepRapFirmware 3.1.1 Port for LPC
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md to see what's new in RepRapFirmware.
See https://github.com/gloomyandy/RepRapFirmware/blob/LPC_RRFv3.1.0/WHATS_NEW_LPC.md for details of what's new in the LPC version.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC firmware specific Wiki: https://github.com/gloomyandy/RepRapFirmware/wiki
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V3.1.1 of the DSF. The version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.1.1
See the above V3 thread for details.
Experimental RepRapFirmware 3.1.0 Port for LPC
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/dc42/RepRapFirmware/blob/v3.01-dev/WHATS_NEW_RRF3.md to see what's new in RepRapFirmware.
See https://github.com/gloomyandy/RepRapFirmware/blob/LPC_RRFv3.1.0/WHATS_NEW_LPC.md for details of what's new in the LPC version.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC firmware specific Wiki: https://github.com/gloomyandy/RepRapFirmware/wiki
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V3.1.0 of the DSF. The version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.1.0
See the above V3 thread for details.
Experimental RepRapFirmware 3.01 RC12 Port for LPC
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/dc42/RepRapFirmware/blob/v3.01-dev/WHATS_NEW_RRF3.md to see whats new in RepRapFirmware.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC firmware specific Wiki: https://github.com/gloomyandy/RepRapFirmware/wiki
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V2.2.0 of the DSF. The version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.01RC12
See the above V3 thread for details.
Experimental RepRapFirmware 3.01 RC11 Port for LPC
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/dc42/RepRapFirmware/blob/v3.01-dev/WHATS_NEW_RRF3.md to see whats new in RepRapFirmware.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V2.1.1 of the DSF. The version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.01RC11
See the above V3 thread for details.
Experimental RepRapFirmware 3.01 RC10 Port for LPC
Note: This release will report the version number as RC9+1, but it is in fact RC10, the version.h file was not uploaded by dc42.
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/dc42/RepRapFirmware/blob/v3.01-dev/WHATS_NEW_RRF3.md to see whats new in RepRapFirmware.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V2.1.1 of the DSF. The version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.01RC10
See the above V3 thread for details.
Experimental RepRapFirmware 3.01 RC9 Port for LPC
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/dc42/RepRapFirmware/blob/v3.01-dev/WHATS_NEW_RRF3.md to see whats new in RepRapFirmware.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V2.1.0 of the DSF. The version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.01RC9
See the above V3 thread for details.
Experimental RepRapFirmware 3.01 RC8 Port for LPC
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/dc42/RepRapFirmware/blob/v3.01-dev/WHATS_NEW_RRF3.md to see whats new in RepRapFirmware.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V2.0.0 of the DSF the version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.01RC8
See the above V3 thread for details.
Experimental RepRapFirmware 3.01 RC7 Port for LPC
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/dc42/RepRapFirmware/blob/v3.01-dev/WHATS_NEW_RRF3.md to see whats new in RepRapFirmware.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V1.3.2 of the DSF the version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.01RC7
See the above V3 thread for details.
Experimental RepRapFirmware 3.01 RC6 Port for LPC
Note: Those upgrading from version 2 need to modify your config files for version 3, see here: https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
See https://github.com/dc42/RepRapFirmware/blob/v3.01-dev/WHATS_NEW_RRF3.md to see whats new in RepRapFirmware.
RepRap forum thread on V3 of the LPC port: https://reprap.org/forum/read.php?147,859857,page=1
LPC port of RepRapFirmware is experimental - use at your own risk
For anyone using the SBC version of firmware you will need to use V1.3.1 of the DSF the version of this modified for use with LPC based firmware can be found here: https://github.com/gloomyandy/DuetSoftwareFramework/tree/LPC_RRFv3.01RC6
See the above V3 thread for details.